DVD, BlueRay Drives getting swapped data report information

[radmanrugg]

Exelent program. Thanks.

Found 1 minor bug.

Information on my DVD Burner
General information
Drive Model: TSSTcorp CDDVDW SH-S243N
Drive Revision: SB00
Serial Number: ILTP008555WL
Device Type: BD-RE

Device capabilities
Drive can read: CD-R, CD-RW, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-RAM, DVD+R DL, BD, BD-RE
Drive can write: CD-R, CD-RW, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-RAM, DVD+R DL, BD, BD-RE

BD, BD-RE is not correct

Information on my Blueray Burner
General information
Drive Model: PIONEER BD-RW BDR-205
Drive Revision: 1.04
Serial Number: Q9896GCSB0012500
Device Type: DVD+R DL

Device capabilities
Drive can read: CD-R, CD-RW, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-RAM, DVD+R DL
Drive can write: CD-R, CD-RW, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-RAM, DVD+R DL

BD, BD-RE is missing

Information on my 3rd optical DVD burner drive
General information
Drive Model: TSSTcorp CDDVDW SH-S223L
Drive Revision: SB02
Serial Number: 0S23D57789CLMNOP
Device Type: DVD+R DL

Device capabilities
Drive can read: CD-R, CD-RW, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-RAM, DVD+R DL
Drive can write: CD-R, CD-RW, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-RAM, DVD+R DL

all good here

[Martin]

Thanks for the report.
Please attach the HWiNFO32 Debug File (HWiNFO32.DBG after you run it in Debug Mode and close), so I can analyse why this happens.

[radmanrugg]

finally found HWiNFO32.DBG.

I don't know if its intentional but the Processor reports correctly in some places as a Xeon W3520 at 2.67GHz and others as Intel core i7-2000 with Original Processor Frequency of 2000.0 MHz

[radmanrugg]

7zip of debug file. Had trouble adding it as it would not compress enough into zip.

[Martin]

Thanks for the DBG, I'll analyse it.
As for the CPU model, please check your BIOS settings what clock is specified for the CPU. It should be 2.67 GHz, but your CPU reports a max clock of 2.0 GHz, so it might be reduced by the BIOS..

Please let me know which drive letters are used by the DVD/BD drives. The system returns the following ones:
X: PIONEER BD-RW BDR-205
Y: PIONEER BD-RW BDR-205
Z: TSSTcorp CDDVDW SH-S223L
however, that doesn't seem to be correct since X: and Y: are reported the same.

[Martin]

I also made an improvement to optical drive enumeration, so please try this build:
<!-- w --><a class="postlink" href="http://www.hwinfo.com/beta/hw32_366_1092.zip">www.hwinfo.com/beta/hw32_366_1092.zip</a><!-- w -->
and let me know if it fixed the issue with BD/DVD info.