[solved] Z77X-D3H/Z77X-UP5

[Martin]

Hi stasio,
I have rewritten the PMBus VR support and need to test it. Could you please run a test with this Beta:
http://www.hwinfo.com/beta/hw64_394_1576.zip
and attach a new Report File, or a screenshot of the sensors window showing all the IRF VR values reported?
Now you should see each particular VR output with a correct label.
Thanks.

[stasio]

(04-11-2012 09:11 PM)Martin Wrote:  Hi stasio,
I have rewritten the PMBus VR support and need to test it. Could you please run a test with this Beta:
http://www.hwinfo.com/beta/hw64_394_1576.zip
and attach a new Report File, or a screenshot of the sensors window showing all the IRF VR values reported?
Now you should see each particular VR output with a correct label.
Thanks.

Thanks for update Martin.
Files attached.

[Martin]

Thanks! Seems to work perfect Now you can monitor straight the VRs

[stasio]

Yea,thanks.

[Martin]

Is the VCCSA/IMC voltage of 0.993-0.996 V correct?
In that case it would mean the IT8728F VIN4 is the same value monitored ..

[stasio]

(04-12-2012 07:19 AM)Martin Wrote:  Is the VCCSA/IMC voltage of 0.993-0.996 V correct?
In that case it would mean the IT8728F VIN4 is the same value monitored ..

In BIOS is on Auto,ET6 show 0.9250V.
IRF for Vdimm also slightly offset (compare with ITE).
ET6 show excatly values set in BIOS and will be nice if you can adjust.

Also,please inform Tamas.

[Martin]

Hm, the SIO has a precision of 12 mV..
When you change the IMC voltage in ET6 is it then reflected by SIO VIN4 and the IRF chip?

[stasio]

(04-12-2012 09:59 AM)Martin Wrote:  Hm, the SIO has a precision of 12 mV..
When you change the IMC voltage in ET6 is it then reflected by SIO VIN4 and the IRF chip?

IMC set to 0.950V in BIOS.
No change in HWiNFO.

Edit:
It's mean 1.650V,
SIO can show 1.658 or 1.646,right.

[Martin]

Hm, strange.. According to the review the VCCSA/IMC rail should be powered from that IRF.
What else might be that value, any ideas?

[stasio]

Intel HD Graphics?

[Martin]

Hmm, could be
Any chance to prove that? put some load on iGPU ?

[stasio]

I using nVidia card.

[Martin]

Is it possible to switch to iGPU only, just for this quick test?

[stasio]

(04-12-2012 11:18 AM)Martin Wrote:  Is it possible to switch to iGPU only, just for this quick test?

Added +0.01V for Dynamic GFX Core (VAXG DVID) in BIOS.

And value (VCCSA/IMC) change comparing with previous pic.

[Martin]

That's great, now we probably decoded all things here Many thanks for the feedback!
Now, interesting would be to check the X79 mobo too

[stasio]

(04-12-2012 11:40 AM)Martin Wrote:  That's great, now we probably decoded all things here Many thanks for the feedback!
Now, interesting would be to check the X79 mobo too

Yea,I just mail to Ray that for X79 I will try to contact my friend.
As said earlier,please inform also Tamas.
Thanks.

Edit:
Instead CPU VID should be CPU V

[Martin]

Thanks Please ask your friend for a log+debug file using the latest Beta.
Ray is watching this thread and Tamas probably as well (although he seems to be on vacation currently, I haven't seen him online for few days ).

[stasio]

Edit post earlier.
Why max value for GFX is 10V?

[Martin]

Ok, will adjust that too. More likely to "CPU Vcore".

[stasio]

(ATX+12V) should be same as ITE +12V read or not?