Memory Dual Channel not detected - Printable Version
+- HWiNFO/32/64 Forum (http://www.hwinfo.com/forum)
+-- Forum: Bug Reports (/Forum-Bug-Reports)
+--- Forum: HWiNFO32 & HWiNFO64 Bug Reports (/Forum-HWiNFO32-HWiNFO64-Bug-Reports)
+--- Thread: Memory Dual Channel not detected (/Thread-Memory-Dual-Channel-not-detected)
Memory Dual Channel not detected - city_zen - 03-11-2010 08:22 PM
HWiNFO32 is my favorite hardware inventory program. Thanks for developing it.
There is just one bug that seems to keep showing up and it's the fact that my system's memory keeps getting detected as running in Single Channel, while CPU-Z correctly detects as running in Dual Channel.
I'm attaching a screenshot.
Let me know if you need more info.
Re: Memory Dual Channel not detected - Martin - 03-11-2010 08:49 PM
thanks for your report.
Yes, I need more info - please attach a Report + Debug File.
See http://www.hwinfo.com/forum/Thread-IMPORTANT-Read-this-before-submitting-a-report for instructions how to create a Debug File.
Re: Memory Dual Channel not detected - VictorVG - 03-11-2010 09:40 PM
That is chip set and hardware mode using Your motherboard? Some combination CPU+Motherboard+Memory chip can't stable work on dual channel mode, also all DRAM/SRAM memory chip use multi matrix architecture for minimize hardware delay timings and CPY-Z can indicate as dual channel simple memory chip bus. Also on Your report I can't read the CPU type - as samples, if Your use AMD Socket-754 CPU, then memory controller on this CPU work's only on single channel mode. On Your report I can't read this technical data. Please check for control at memory controller real use Dual Channel mode the over hardware information tools, example Lavalys Everest (AIDA32) Ultimate Edition. If use this tool on trial mode don't create report, but screen information Your can use for control.
Also Your can use any my bug reports as examples - <!-- l --><a class="postlink-local" href="http://www.hwinfo.com/forum/viewtopic.php?f=5&t=13">viewtopic.php?f=5&t=13</a><!-- l -->
Best regards, Victor
Re: Memory Dual Channel not detected - city_zen - 03-12-2010 01:22 AM
OK, I'm attaching a rar file which contains a report and a debug file.
Let me know if you need more info or if I can help you debug it in any other way.
Re: Memory Dual Channel not detected - city_zen - 03-12-2010 01:31 AM
VictorVG Wrote:city_zenMy system's specs:
- CPU: Intel Core 2 Duo E6550 2.33 GHz
- Memory: 2 x 1 GB DDR2 PC2-6400 (400 MHz)
- Motherboard/Chipset: MSI MS-7345 / Intel P35 + ICH9R
Both the CPU and the memory are overclocked.
I'm fairly sure I've seen the legend "Dual Channel" on the screen during the computer's boot process, that's why I think CPU-Z is giving the right info and HWiNFO32 is not. Plus, my two memory sticks are identical and installed in alternated slots on the motherboard (as they are supposed to go in order to work in dual channel). We'll see.
Re: Memory Dual Channel not detected - Martin - 03-12-2010 08:03 AM
Thanks for the additional data. Now I can see that this is a bug in HWiNFO32.
Please try this build: http://www.hwinfo.sk/beta/hw32_343_636.zip and let me know if it's fixed now.
Re: Memory Dual Channel not detected - city_zen - 03-12-2010 06:25 PM
Martin Wrote:Thanks for the additional data. Now I can see that this is a bug in HWiNFO32.
HWiNFO32 now detects my memory as running in Dual-Channel.
Thanks a lot for fixing it.
Re: Memory Dual Channel not detected - Martin - 03-12-2010 07:43 PM
You're welcome. Thanks for the feedback.
city_zen Wrote:It's fixed!!!
Re: Memory Dual Channel not detected - VictorVG - 03-15-2010 01:30 AM
city_zen Wrote:My system's specs:Your system is far beyond the stability of the of logic circuits, and you have caused a significant decrease in reliability due to the sharp, in the tens of thousands of aging accelerate aging of the semiconductor. Nevertheless, this is your personal right - the system fails after six months or a year - to buy a new systems and pay for data recovery from damaged disks - the bus frequency has increased over the admissible values by 100% leads to failure of devices. It's me you like IT system engineer with practical experience of over 30 years and I can guarantee it. You can take a risk, but the report says that the system works in an invalid mode. Do you think we, as developers of equipment for nothing lay in its provision for operating frequencies and waveform signals? Scatter parameters even with chips per wafer is in the range of 15% - 20%, and from different parties and may reach 30% - 40%.
Re: Memory Dual Channel not detected - NeoCat - 04-11-2010 09:46 PM
bug still active in latest version of hwinfo32 (3.45-674)
cpu: core 2 duo e6320
m/b: biostar tforce p965
ram: 2x1gb kit ocz xtc soe pc2-6400
Re: Memory Dual Channel not detected - Martin - 04-11-2010 10:00 PM
Thanks for the report. The previous fix was for other chipsets, now I extend it to P96x.
Please try this build: http://www.hwinfo.sk/beta/hw32_345_682.zip
and give feedback.
NeoCat Wrote:bug still active in latest version of hwinfo32 (3.45-674)
Re: Memory Dual Channel not detected - NeoCat - 04-12-2010 10:45 AM
Martin Wrote:Please try this build: http://www.hwinfo.sk/beta/hw32_345_682.zipThanks, now displays correctly