Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
64_444 Freezes Windows on sensor scan
#1

.zip   HWiNFO64.zip (Size: 150.83 KB / Downloads: 1)
I actually had HWiNFO64 running previously, but needed to reinstall Windows for other reasons. Now I can't get it to work properly. Whenever I try to view the sensors Windows just freezes and I have to power down/restart.

Motherboard is Gigabyte X99 Gaming G1 Wifi

Debug attached.


Thanks

edit: doesn't appear attachment is actually attaching
Reply
#2
Have you pressed the "Add Attachment" button too?
It's also better to compress it (ZIP, RAR, 7z, etc).
Reply
#3
I compressed it and it worked. Previously I always saw the upload progress and then it just wasn't there.
Reply
#4
Thanks, but according to that file it works - I can't see any crash.
Have you opened sensors while creating the Debug File? If not, please do. Then after freezing reboot the system and attach the new Debug File stored on your drive. I need it to capture the problem.
Reply
#5
ran again, it says "Detecting Sensors... ACPI #0" and freezes
Thanks!


.zip   HWiNFO64.zip (Size: 119.12 KB / Downloads: 1)
Reply
#6
Please try this build: http://www.hwinfo.com/beta/hw64_445_2310.zip
and let me know if it works now.
Reply
#7
Thanks will do.

Thanks. Same result:


Attached Files
.zip   HWiNFO64.zip (Size: 105.45 KB / Downloads: 2)
Reply
#8
Thanks. Are there maybe any settings in the BIOS to enable Thermal Management device or something similar ?
If yes, please try to enable that and see if it works then. Let me know...
Reply
#9
You might also try this new build, I think it should fix the problem: http://www.hwinfo.com/beta/hw64_445_2311.zip
Reply
#10
(09-10-2014, 09:31 AM)Martin Wrote: You might also try this new build, I think it should fix the problem: http://www.hwinfo.com/beta/hw64_445_2311.zip

Excellent that worked!

It did crash once while scrolling down in the sensors, but it didn't freeze Windows and I was actually able to see the sensor window and values. I reloaded it and it seemed ok.

Uploading that bug report just in case. Is there a place to provide donations on your site btw?


Attached Files
.zip   HWiNFO64.zip (Size: 351.07 KB / Downloads: 1)
Reply
#11
Thanks for the feedback.
For donations, please check here: http://www.hwinfo.com/forum/Thread-donations
Reply
#12
It is crashing on its own now without me checking sensors, though Windows is not freezing. Also do new beta patches always incorporate prior fixes? In other words if I get a working beta, should I update to a later one when it is available? Thanks.


Attached Files
.zip   HWiNFO64 (2).zip (Size: 601.94 KB / Downloads: 2)
Reply
#13
So now only HWiNFO crashes - is it an application crash ?
Do you maybe use any other system monitoring tool in parallel ?
Yes, all fixes are being carried forward, so you can upgrade to the latest build.
Reply
#14
(09-11-2014, 07:20 AM)Martin Wrote: So now only HWiNFO crashes - is it an application crash ?
Do you maybe use any other system monitoring tool in parallel ?
Yes, all fixes are being carried forward, so you can upgrade to the latest build.

It is an application crash I'll get that information here briefly, it seems to take a couple minutes. I'm using HWiNFO to feed temps to Aquasuite for fan curves, but I'm not running any other monitoring software.

edit:
Problem signature:
Problem Event Name: APPCRASH
Application Name: HWiNFO64.exe
Application Version: 4.4.5.0
Application Timestamp: 54100bba
Fault Module Name: StackHash_cd2a
Fault Module Version: 6.1.7601.18247
Fault Module Timestamp: 521eaf24
Exception Code: c0000374
Exception Offset: 00000000000c4102
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
Additional Information 1: cd2a
Additional Information 2: cd2afb79ec34297193f5b73ddc4dcff6
Additional Information 3: 7f74
Additional Information 4: 7f745ceb0c4421f57237bee579bf63de

edit2:
Problem signature:
Problem Event Name: APPCRASH
Application Name: HWiNFO64.exe
Application Version: 4.4.5.0
Application Timestamp: 5410964a
Fault Module Name: HWiNFO64.exe
Fault Module Version: 4.4.5.0
Fault Module Timestamp: 5410964a
Exception Code: 40000015
Exception Offset: 0000000000176c3a
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
Additional Information 1: 9078
Additional Information 2: 90782feada8b685cb027efd421750f67
Additional Information 3: eb71
Additional Information 4: eb718473fcd8c3f99338e9ea6cc6cbb8
Reply
#15
It would be great if you could reproduce it and create more Debug Files which capture it, since it's not yet very clear to me what happens there. Did it crash while monitoring only, or while you made changes to the sensor configuration ?
You might also try to do a "Reset Preferences" in HWiNFO to see if that maybe helps - however, you'll then loose your custom sensor settings.
Reply
#16
(09-11-2014, 01:21 PM)Martin Wrote: It would be great if you could reproduce it and create more Debug Files which capture it, since it's not yet very clear to me what happens there. Did it crash while monitoring only, or while you made changes to the sensor configuration ?
You might also try to do a "Reset Preferences" in HWiNFO to see if that maybe helps - however, you'll then loose your custom sensor settings.

Ok I reset it have the debug going and will post a debug if it crashes. It was crashing just while monitoring. Each time HWiNFO was just in the system tray. I had the settings set to launch and minimize the sensors though. Thanks.

edit: Ok just crashed:

Problem signature:
Problem Event Name: APPCRASH
Application Name: HWiNFO64.exe
Application Version: 4.4.5.0
Application Timestamp: 5410964a
Fault Module Name: StackHash_e608
Fault Module Version: 6.1.7601.18247
Fault Module Timestamp: 521eaf24
Exception Code: c0000374
Exception Offset: 00000000000c4102
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
Additional Information 1: e608
Additional Information 2: e608076fd37a5d90e03ffafe92d54381
Additional Information 3: 1e34
Additional Information 4: 1e34927a24560a52c361cb2867e9d1db


Attached Files
.zip   HWiNFO64.zip (Size: 535.26 KB / Downloads: 1)
Reply
#17
Please try this build: http://www.hwinfo.com/beta/hw64_445_2314.zip
and let me know the result...
Reply
#18
Ok So I've run that one (445.2314) ~2.5 hrs with no crashes. Definitely seems to have resolved that issue.

Only really minor thing now is it doesn't seem to want to start automatically with Windows for me. I didn't have any forced restarts I just manually restarted Windows to test that piece of functionality and to make sure restarting didn't introduce any unknown issues. Thanks.


update: It did crash again. Debug even compressed was too large though, so deleted the debug and will attach a new one if it crashes again. Was browsing in Chrome at the time.
Reply
#19
Thanks for the feedback.

Try to disable the Autostart option, click OK, then enable it and click OK.
Reply
#20
I'll try that. Here is a new debug. I was browsing Chrome again when it crashed.


Attached Files
.zip   HWiNFO64.zip (Size: 194.8 KB / Downloads: 1)
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)