Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Double Multiply custom Values
#1
Hello all,

is it possible to multiply a custom value with two steps?

Example:

Code:
RAW_VALUE/D1*D2

thank you!
Reply
#2
If D1 and D2 are constants then you can put the 1/(D1*D2) result straight into the Multiply field.
Reply
#3
Thanks. I have tested it, but it is no working...

My real example is: (1*0.016)*60
Reply
#4
What value have you entered into that field?
And why do you need to adjust this? In case HWiNFO lacks dedicated adjustments for some mainboard, just let me know and I will try to fix that internally.
Reply
#5
(12-11-2018, 12:21 PM)Martin Wrote: What value have you entered into that field?
And why do you need to adjust this? In case HWiNFO lacks dedicated adjustments for some mainboard, just let me know and I will try to fix that internally.

i have tried many values:

Code:
(1*0.016)*60
1*(0.016*60)
...

This is not a problem with the motherboard or sensor. i have this sensor on my mainboard fan header: 

https://www.caseking.de/bitspower-durchf...d-325.html

1 l/s have 84 pulses. i want to display the l/h value.
Reply
#6
You need to enter just the resulting number, so: 0.96
Reply
#7
Perfect, it works fine - thanks :-)

i have misunderstand the way of calculation
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)