Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Fan Control looses settings
I have everything setup properly. However when windows starts my fan control settings are lost. 
I am trying to do a manual fan control setting the fan to 4000 RPM. When I do this and press "set manual" the fans ramp up and go as expected.
However when I reboot then program opens, I see the fan control panel open for a second and then it auto minimizes. However the fan settings I chose prior to reboot are lost and the manual setting is set back at 0. What am I doing wrong?

I have OpenFanCtrlMin=1

Everything seems to work as far as auto start except for the actual fan setting. 

Please help!
Manual fan speed setting is not intended to be preserved, it was though to be used for testing purposes only.
You might achieve the desired speed by defining a custom auto fan speed for a single level that will always be true (i.e. 4000 RPM when temperature < 120 C). Such setting will also be preserved and applied always after reboot.

Forum Jump:

Users browsing this thread: 1 Guest(s)