Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Fintek F71809U Support (Jetway NC98)
#1
Brick 
Can you add voltage and fan speed readings for Fintek F71809U on Jetway NC98-525E-LF. Reference to SpeedFan you can find here and AIDA64 here.

Thanks.
Reply
#2
Please attach the HWiNFO Debug File of that system.
Reply
#3
Brick 
Which part (SMBus) of Debug file do you need?
Reply
#4
Whole one would be best.
Reply
#5
Brick 
I don't want to share all that crap. Wink
Reply
#6
There's nothing to worry about, but in that case post the LPC and sensor section.
Reply
#7
Don't have sensor section
LPC section
Quote:- Detecting SuperIO/LPC...
LPC @ 2E
LPC NS FF
LPC SMSC1 FF
LPC WINB 04 08
LPC ITE1 04 08
LPC ITE2 04 08
LPC ITE3 04 08
LPC ITE4 04 08
LPC SMSC2 04
LPC @ 4E
LPC NS FF
LPC SMSC1 FF
LPC WINB FF FF
LPC ITE1 FF FF
LPC ITE2 FF FF
LPC ITE3 FF FF
LPC ITE4 FF FF
LPC SMSC2 FF
Reply
#8
OK, I will try to add support for this based on the information available.
Reply
#9
Try this build and let me know the result: www.hwinfo.com/beta/hwi64_585_3468.zip
Reply
#10
Nice. How about 32-bit? I'm currently using Win 7 32-bit. Smile
Reply
#11
Here you go: www.hwinfo.com/beta/hwi32_585_3469.zip
Reply
#12
Brick 
   
No Fans, Voltages etc.  Huh
Reply
#13
I will need the Debug File, especially LPC and sensors part.
Reply
#14
Brick 
Quote:- Detecting SuperIO/LPC...
LPC @ 2E
LPC NS FF
LPC SMSC1 FF
LPC WINB 04 08
LPC @ 4E
LPC NS FF
LPC SMSC1 FF
LPC WINB FF FF
LPC ITE1 FF FF
LPC ITE2 FF FF
LPC ITE3 FF FF
LPC ITE4 FF FF
LPC SMSC2 FF
Quote:Fintek LPC ID: 408
Fintek [408] @ IO FFFF
00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F 0123456789ABCDEF
------------------------------------------------------------------------
0000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
0010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
0020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
0030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
0040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
0050: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
0060: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
0070: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
0080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
0090: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
00A0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
00B0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
00C0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
00D0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
00E0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ
00F0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿÿ

Found (#5)
Major things that changed compared to previous Debug.
Reply
#15
Thanks. Try this build and let me know the results: http://www.hwinfo.com/beta/hwi32_585_3470.zip
Reply
#16
Brick 
   
Reference to http://bugtrack.almico.com/view.php?id=1702#c5650. After alfredo removed showing volt readings.  Sad

       

Don't match reading.  Sleepy

How do you decided to named one Temp reading Motherboard!  Tongue
Are you sure voltage names is correct?
Reply
#17
The first temperature is the local temperature of the Fintek chip and since this chip is usually placed on the mainboard, such value is commonly referenced as the Mainboard temperature.
This chip can monitor only voltages shown by HWiNFO.
Fan2 value is not shown because it's 0. If you connect a fan there or it will start to spin, it will be shown. Fan4 value is invalid, I will remove it in the next build.
Reply
#18
Can you rename Volt and Fan names accordingly BIOS names:

VCC3V - Vcc3V
VSB3V - 3VSB
VBAT3V - VBat
Fan1 - CPUFAN
Fan2 - SYSFAN1
Fan3 - SYSFAN2

Or it's not good practice. Because sensor check is not motherboard specific, but universal on all motherboards?
Reply
#19
I can rename that, but need DMI mainboard strings to properly adjust this for your mobo.
Reply
#20
Is it Motherboard ID (found in AIDA64 not HWiNFO)? Starts with 64-0100-xxxx-xxxxx-xxxxxxx-Pineview. It's not full string.
Reply


Forum Jump:


Users browsing this thread: 2 Guest(s)