Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Hard Drive Temp
#1
The original version I D/L of hwinfo64 showed a hard drive temp but since I updated to ver# v5.54-3200 it is not shown. Listed below are the temps shown

CPU core 0
CPU core 1
MCP temp
Acer EM61sm....temp 1
                       temp 2
                       temp 3
Desk top  Acer Aspire ASE380 OS Windows 7 Professional  motherboard Acer EM61sm  Hard Drive Western Digital WD10

Is there an explanation for this
Reply
#2
Please attach the HWiNFO Debug File and Report File of that machine as described here: https://www.hwinfo.com/forum/Thread-IMPO...g-a-report
It would also be useful if you could attach the same files made using an older version that worked.
I will then check it and try to fix.
Reply
#3
(07-20-2017, 06:08 PM)Martin Wrote: Please attach the HWiNFO Debug File and Report File of that machine as described here: https://www.hwinfo.com/forum/Thread-IMPO...g-a-report
It would also be useful if you could attach the same files made using an older version that worked.
I will then check it and try to fix.
Hi Martin.....I don't want to put you to a lot of trouble when my minor issue may be corrected in the next update. I will however send a copy of the debug report and maybe you will spot something there. I want to stress please don't spend a lot of time on this. 
Ken


Attached Files
.htm   KEN-PC.HTM (Size: 166.11 KB / Downloads: 1)
Reply
#4
You have attached the report file only and based on that it seems there's indeed some bug in HWiNFO that missed identification of your drive.
So Debug File of the latest and the last working version would be great to identify this problem.
Reply
#5
(07-20-2017, 08:43 PM)Martin Wrote: You have attached the report file only and based on that it seems there's indeed some bug in HWiNFO that missed identification of your drive.
So Debug File of the latest and the last working version would be great to identify this problem.
Sorry I didn't get you the debug file ...hope I have it right this time.
Ken


Attached Files
.htm   KEN-PC.HTM (Size: 287.52 KB / Downloads: 0)
Reply
#6
No, that's not the Debug File. Please follow the instructions here: https://www.hwinfo.com/forum/Thread-IMPO...g-a-report
Reply
#7
(07-20-2017, 10:42 PM)Martin Wrote: No, that's not the Debug File. Please follow the instructions here: https://www.hwinfo.com/forum/Thread-IMPO...g-a-report
Ok....I unchecked "debug write direct" and only have "debug mode" chk'd ....hope i have it right this time  Blush


Attached Files
.htm   KEN-PC.HTM (Size: 166.11 KB / Downloads: 1)
Reply
#8
Sorry, but no Sad You need to locate the HWiNFO64.DBG file and attach that one.
Reply
#9
(07-21-2017, 07:38 AM)Martin Wrote: Sorry, but no Sad You need to locate the HWiNFO64.DBG file and attach that one.
So  much for not taking up your time on this Martin but I think I finally have the right report for U


Attached Files
.dbg   HWiNFO64.DBG (Size: 368.56 KB / Downloads: 1)
Reply
#10
Thanks, that's the file I needed Smile
Now would you be able to create the same file using an older version of HWiNFO that worked?
Reply
#11
(07-21-2017, 02:51 PM)Martin Wrote: Thanks, that's the file I needed Smile
Now would you be able to create the same file using an older version of HWiNFO that worked?
Sorry I can't provide you with this as I don't have a "restore point" to take me back to the earlier version. All I can tell you is that I have not made any system changes or downloads since that time except for "windows updates"
Reply
#12
If you remember the previous HWiNFO version that worked for you, you can download it here: http://www.oldfoss.com/HWiNFO.html
It would really be helpful for me if I could also get a DBG file from such a version, so I can compare where the problem happened.
Reply
#13
(07-21-2017, 10:02 PM)Martin Wrote: If you remember the previous HWiNFO version that worked for you, you can download it here: http://www.oldfoss.com/HWiNFO.html
It would really be helpful for me if I could also get a DBG file from such a version, so I can compare where the problem happened.
Did an uninstall of latest ver. and D/L from cnet downloads first ver. 5.02-2575 I installed and have attached copy of the DBG file.


Attached Files
.dbg   HWiNFO64.DBG (Size: 509.08 KB / Downloads: 1)
Reply
#14
Thank you.
Please try to disable the "CSMI SAS Support" option in the latest version of HWiNFO and let me know if that will help.
Reply
#15
(07-22-2017, 05:13 PM)Martin Wrote: Thank you.
Please try to disable the "CSMI SAS Support" option in the latest version of HWiNFO and let me know if that will help.
Wow !!! I admire your determination.Following your above instruction corrected the problem for me and it is now showing the hard drive temp.
One last thing....can you tell me what temp 1 2  3  are.
Thanks again for sticking with me to resolve my minor problem
Reply
#16
Thanks for your feedback. I will also try to fix this, so that it won't be needed to disable that option.
Sorry, but I'm not sure which exact temperatures you mean.
Reply
#17
(07-22-2017, 09:40 PM)Martin Wrote: Thanks for your feedback. I will also try to fix this, so that it won't be needed to disable that option.
Sorry, but I'm not sure which exact temperatures you mean.
I have attached a little snap shot circling the Temps


Attached Files Thumbnail(s)
   
Reply
#18
These temperatures are specific for your mainboard and I'm sorry, but I don't know their meaning for your model.
You might check in the BIOS if it reports any temperatures and you're able to find a correlation between them.
Reply
#19
(07-23-2017, 07:32 PM)Martin Wrote: These temperatures are specific for your mainboard and I'm sorry, but I don't know their meaning for your model.
You might check in the BIOS if it reports any temperatures and you're able to find a correlation between them.
Thanks anyways and keep up the work.
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)