Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Improvement For Memory
#1
hi,

it would be great, if the memory/spd information in hwinfo's system summary could be improved.

1) In the memory info we need also tRFC (see cpu-z in memory.jpg)
2) In SPD info we need also tRC (see cpu-z in spd.jpg

we would be very thankful if these two readings would be completed.

Cool

[attachment=206]

[attachment=207]
INTEL DX58SO2 / Intel Core i7-960 / Kingston HyperX 1600 24GB / NVIDIA GeForce GTS 450 / RME Fireface 800
Reply
#2
Is this for the i7-960 ?
I have checked and Trfc should be reported under current memory parameters for Nehalem.
Trc should also be available under SPD as "Minimum Active to Active/Refresh Time (tRCmin)".
Reply
#3
yes but we would like to see this in "system summary" as well to complete the standard readings like in cpu-z. there are two columns free, enough place.

would be great.
INTEL DX58SO2 / Intel Core i7-960 / Kingston HyperX 1600 24GB / NVIDIA GeForce GTS 450 / RME Fireface 800
Reply
#4
I see. Let me check if I can fit it somewhere there..
Reply
#5
It will be available in the next build.
Reply
#6
(10-02-2011, 10:17 PM)Martin Wrote: It will be available in the next build.

great

Rolleyes



INTEL DX58SO2 / Intel Core i7-960 / Kingston HyperX 1600 24GB / NVIDIA GeForce GTS 450 / RME Fireface 800
Reply
#7
(10-04-2011, 05:02 PM)mididoc Wrote:
(10-02-2011, 10:17 PM)Martin Wrote: It will be available in the next build.

great

Rolleyes




thanks martin for the new values in system summery.

Wink
INTEL DX58SO2 / Intel Core i7-960 / Kingston HyperX 1600 24GB / NVIDIA GeForce GTS 450 / RME Fireface 800
Reply
#8
there is one value not filled out in the new column of memory

tRC

see picture

INTEL DX58SO2 / Intel Core i7-960 / Kingston HyperX 1600 24GB / NVIDIA GeForce GTS 450 / RME Fireface 800
Reply
#9
Yes, because I don't know how to read the current value of tRC for that memory controller.
Reply
#10
(10-07-2011, 11:14 PM)Martin Wrote: Yes, because I don't know how to read the current value of tRC for that memory controller.

i would think,
memory controller in cpu,
or bios directly.

Huh

INTEL DX58SO2 / Intel Core i7-960 / Kingston HyperX 1600 24GB / NVIDIA GeForce GTS 450 / RME Fireface 800
Reply
#11
i mean,

if you cannot get this info, it's not so bad,
cpu-z does not display this either in the memory settings, just in spd like you, too.

i would just move tRFC to the empty column of tRC and move CR down to the recent column of tRFC. so you have all in a line.

the spd readings are exellent now.

very helpful to get these important infos right in the summary listings.

[attachment=218]

Wink
INTEL DX58SO2 / Intel Core i7-960 / Kingston HyperX 1600 24GB / NVIDIA GeForce GTS 450 / RME Fireface 800
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)