Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
MSI G41TM-P33 incorrect reading voltage chip FINTEK F71889
#1
I found than HWiNFO32 3.60/3.60.973 and Lavalys Everest 5.50.2253 beta incorrect read power sensors +5V and +12V. BIOS read this sensors true. I check use digital multimetr MASTECH M320 (class 0.5). Found:

+5V sensor:

BIOS ~ 4.96V, multimetr +5.024V, but HWiNFO32 read this sensor data as +3,70V (???)

+12V sensor:

BIOS ~ 11.944V, multimetr +12.147V, but HWiNFO32 read this sensor data as +6,25V (???)

Reports attached

Link on FINTEK Super I/O chip manual:

<!-- m --><a class="postlink" href="http://www.fintek.com.tw/files/productfiles/F71889_V0.28P.pdf">http://www.fintek.com.tw/files/productf ... V0.28P.pdf</a><!-- m --> - full manual
<!-- m --><a class="postlink" href="http://www.fintek.com.tw/files/productfiles/F71889_ab.pdf">http://www.fintek.com.tw/files/productf ... 889_ab.pdf</a><!-- m --> - about chip press release


Attached Files
.rar   Reports_and_chip_manual.rar (Size: 17.22 KB / Downloads: 52)
Reply
#2
Every mainboard needs special adjustments since they use different connected sensors (it's not an issue of Fintek sensor support).
Please attach a full HWiNFO32 Report and Debug File including sensor data, then I'll try to adjust the values.
Reply
#3
Ok! Welcome. I get to the house and went out. Now I went from a friend, because simply unable to report on the observation ...
Reply
#4
Additional. I send required information:

debuglog.htm
HWiNFO32.DBG
HWiNFO32.INI
Standard.htm

debug log, configuration data and perfomance test for reference information.Smile


Attached Files
.rar   debuglog.rar (Size: 88.13 KB / Downloads: 49)
Reply
#5
Thanks for the data. Unfortunately you didn't include the Sensor data in those reports. Please make sure you open the Sensors window and then save the Report (+DBG) and submit again.
Reply
#6
Ok! I added information:

COLUMBIA.LOG
HWiNFO32.DBG
HWiNFO32.INI
sensors.CSV
sensors.png
sensorslog.CSV
Standard.htm

sorry, my multimeter M320 can't send data to PC - this is portable digital Amper-Volt-Omm meter, class 0,5% ±1 digit, 3,5 digit...


Attached Files
.rar   sensors.rar (Size: 133.57 KB / Downloads: 56)
Reply
#7
Thanks for the additional data.
Please try this build: <!-- w --><a class="postlink" href="http://www.hwinfo.com/beta/hw32_360_978.zip">www.hwinfo.com/beta/hw32_360_978.zip</a><!-- w -->
and let me know if it's ok now..
Reply
#8
Martin

Big thanks! All data read is correct. Smile


Attached Files
.rar   datalog.rar (Size: 5.64 KB / Downloads: 50)
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)