Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Solved Asus Z170 Mk1 assistant fans + voltage readiings
#1
In the past, I have been able to get the Assistant Fans 1 & 2 to display in HWIFO and in the Sensor Status gadget. I have gone through reinstalling HWINFO, which didn't resolve the issue.

 I then Clean Booted into Windows and uninstalled HWINFO with Revo Uninstaller and followed with JV16 Power Tools registry cleanup. This got the fans to show in the General and Advanced tabs of the Gadget options, but they still do not display even when checked.

In the course of trying to resolve this something happened which caused integer-only (no decimal places) display of voltages and powers. See screen shot. I have done little since the latest install except run the debug and report. This issue has come and gone after and between uninstall/reinstall, which I have done more than once.

Thanks for all your work on HWINFO. It provides fascinating and useful information.


Attached Files Thumbnail(s)
   

.dbg   HWiNFO64.DBG (Size: 1.63 MB / Downloads: 1)
.htm   POD64.HTM (Size: 236.07 KB / Downloads: 2)
Reply
#2
Please try if this build fixes your problem: www.hwinfo.com/beta/hwi64_583_3425.zip
and let me know the result.
Reply
#3
Sorry, build 3425 probably won't fix this. I think this one should: www.hwinfo.com/beta/hwi64_583_3426.zip
Reply
#4
(04-23-2018, 03:28 PM)Martin Wrote: Please try if this build fixes your problem: www.hwinfo.com/beta/hwi64_583_3425.zip
and let me know the result.

This brought the fans back. FYI, Report and Debug for the new version attached. EDIT: The decimal place issue is resolved.

Thanks, again!


Attached Files
.dbg   HWiNFO64.DBG (Size: 1.48 MB / Downloads: 1)
.htm   POD64.HTM (Size: 236.07 KB / Downloads: 1)
Reply
#5
Great, thanks for the feedback.
Reply
#6
(04-23-2018, 04:05 PM)Martin Wrote: Great, thanks for the feedback.

The 3426 build is also working.

EDIT: When I set the Refresh interval to match the 3000ms in the Gadget, the right-hand part of the Gadget display disappeared again. This takes out the decimal places and the units. Screenshot attached.

More: Here are the current Debug and Report.

Please disregard. I don't know what is happening, but an uninstall/reinstall fixed it again.


Attached Files Thumbnail(s)
   

.dbg   HWiNFO64.DBG (Size: 1.48 MB / Downloads: 0)
.htm   POD64.HTM (Size: 236.09 KB / Downloads: 0)
Reply
#7
This is most probably an issue of the HWiNFOMOnitor gadget, which should be checked/reported here (as I'm not its author): https://www.hwinfo.com/forum/Forum-HWiNFOMonitor
Reply
#8
(04-23-2018, 06:05 PM)Martin Wrote: This is most probably an issue of the HWiNFOMOnitor gadget, which should be checked/reported here (as I'm not its author): https://www.hwinfo.com/forum/Forum-HWiNFOMonitor


Thanks for the response. I will go to the other thread.
Reply
#9
(04-23-2018, 06:05 PM)Martin Wrote: This is most probably an issue of the HWiNFOMOnitor gadget, which should be checked/reported here (as I'm not its author): https://www.hwinfo.com/forum/Forum-HWiNFOMonitor

Hi Martin,
I have run into some other fan problems. Previously, I only had fans at Chassis2 and Chassis4, which display properly. I recently added fans to Chassis 3, 5, and 6, but they are not showing up in HWINFO. Is there a fix for this?
Thanks,
ktony
Reply
#10
Are you using the latest HWiNFO version? If yes, please attach a new Debug File, so I can see the details.
Reply
#11
(05-25-2018, 06:35 PM)Martin Wrote: Are you using the latest HWiNFO version? If yes, please attach a new Debug File, so I can see the details.


I am currently using hwi64_583_3426, which you provided for the previous fan difficulty.Debug file attached.
Thanks!


Attached Files
.dbg   HWiNFO64.DBG (Size: 1.05 MB / Downloads: 1)
Reply
#12
Try to upgrade to the latest HWiNFO version, it might resolve the problem with Chassis 5 and 6, but I don't see any fan connected to Chassis 3 in that dump.
Reply
#13
(05-25-2018, 07:31 PM)Martin Wrote: Try to upgrade to the latest HWiNFO version, it might resolve the problem with Chassis 5 and 6, but I don't see any fan connected to Chassis 3 in that dump.


You are right. I misstated. 5 and 6 were the only fans added. I am now running hwi_584, but it has not changed anything. Chassis 2 & 4, plus Assistants 1 & 2 are still there. Uninstall-reinstall, with reboot didn't help.
Thanks for taking time for this.
Reply
#14
I found the bug Smile Will post a fixed version shortly.
Reply
#15
Try this build: www.hwinfo.com/beta/hwi64_585_3453.zip
Reply
#16
(05-25-2018, 10:44 PM)ktony Wrote: Smile
(05-25-2018, 09:19 PM)Martin Wrote: Try this build: www.hwinfo.com/beta/hwi64_585_3453.zip

Yes! 5 and 6 appeared. It may be irrelevant now, but I am including the debug report from the current version.
Many Thanks! You are really fast, too. It is all much appreciated.
ktony
EDIT: This thread should be tagged, "Resolved Again".
Reply
#17
Thanks for the feedback Smile
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)