01-14-2013, 02:15 AM
(This post was last modified: 01-14-2013, 02:18 AM by hagarreset.)
While scanning the sensors I get an crash at the end.
Thanks for help.
v4.11-1831 the same problem...
Thanks for help.
v4.11-1831 the same problem...
Solved Crash while sensor scanning
|
01-14-2013, 02:15 AM
(This post was last modified: 01-14-2013, 02:18 AM by hagarreset.)
While scanning the sensors I get an crash at the end.
Thanks for help. v4.11-1831 the same problem...
01-14-2013, 08:03 AM
Thanks for the report. Is this an application (HWiNFO) crash, or system crash (BSOD) ?
According to the dump I see that your CPU reports limited information, so HWiNFO (and other tools probably too) might be confused by this. Do you maybe have something like "Limit CPUID Max Function" enabled in BIOS? If yes, please disable it and let me know if that helped.
01-14-2013, 10:01 AM
Problem Solved "Limit CPUID Maximum" DISABLED
HWiNFO crash no BSOD Bios(UEFI): "Limit CPUID Maximum Allows you to determine whether to limit CPUID maximum value. Set this item to Disabled for Windows XP operating system; set this item to Enabled for legacy operating system such as Windows NT4.0" Thanks ![]()
01-14-2013, 10:11 AM
So does it mean that disabling it fixed the crash ?
01-14-2013, 10:26 AM
01-14-2013, 10:29 AM
Great
![]() In either case I strongly recommend for all users that "Limit CPUID Maximum" setting in BIOS is set to "Disabled".
08-19-2013, 05:26 PM
Hey Guys nice info about that can any one tell me about these crash sensors exclusive to each part.Thanks!!
|
« Next Oldest | Next Newest »
|