Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Solved SATA 6 Gbps or 3 Gbps in my Acer Aspire 5749 ?
#1
Photo 
I had Acer Aspire 5749 with Intel 2nd Gen. Core i3 2330M and i want to replace my HDD with an SSD. The crystal Disk Info says that HDD transfer rate is SATA/300 or SATA 3 Gbps where as HWinfo64 Says that my notebook's motherboard has two SATA ports which are SATA 6 Gbps.
I know and check with my PC's SATA 6 Gbps port that if you use a SATA 3 Gbps HDD on SATA 6 Gbps port than speed will decrease to 3 Gbps according to device so that is why Crystal Disk Info is showing that.

[Image: 2a0hn48.jpg]

What you think, is it has SATA 3 Gbps PORT or SATA 6 Gbps PORT ?


Attached Files Thumbnail(s)
   
Reply
#2
To be sure, please expand the "Bus" node, then go down and locate your SATA controller device.
This device should contain a section called "SATA Host Controller" where you can find detailed information about its capabilities and status of each port.
Reply
#3
(12-01-2013, 01:51 PM)Martin Wrote: To be sure, please expand the "Bus" node, then go down and locate your SATA controller device.
This device should contain a section called "SATA Host Controller" where you can find detailed information about its capabilities and status of each port.

Thanx for replay, .....Have a look

[Image: 33e61ab.jpg]


It is gen 3 SATA 6 Gb/s, isn't it ?
Reply
#4
Yes
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)