Recent content by cez4r

  1. C

    Custom Polaris GPUs (RX 480) incorrect parameters

    So the 16.9.1 gives us the sensor... Nice :D And this ends the case :) Big, big, big thanks for your help and sharing w/ your knowledge! Cheers
  2. C

    Custom Polaris GPUs (RX 480) incorrect parameters

    Hi, Martin! I've found something interesting: Just before changing the version from 2955 to your new 2977 I was playing with the WattTool (a tool for the RX 4xx series)...
  3. C

    Custom Polaris GPUs (RX 480) incorrect parameters

    @Martin Hi again! I have a humble request - would you mind adding 2 things to the HWINFO: A. VDDCI aka Memory Controler voltage - "Memory Voltage" setting in WattMan (Radeon Settings). I've found that no software can do this! And this is important voltage because the GPU VDDC voltage...
  4. C

    Custom Polaris GPUs (RX 480) incorrect parameters

    Initially I saw few posts around the internet about it but I have tried it myself and I cannot confirm it. Probably the problem is that drivers are not completely removed for complaining people. I've found that the best procedure now for perfect removing it is doing it with the AMD Cleanup...
  5. C

    Custom Polaris GPUs (RX 480) incorrect parameters

    New 16.9.1 drivers - same story ...
  6. C

    Custom Polaris GPUs (RX 480) incorrect parameters

    I won't be testing Crimson 16.9.1 because from different forums I know that OpenCL performance in this version is crippled :( I'll wait for Mr Martin's findings.
  7. C

    Custom Polaris GPUs (RX 480) incorrect parameters

    HWINFO:  2.66W-3.55W GPU-Z:      9.3W-10.3W
  8. C

    Custom Polaris GPUs (RX 480) incorrect parameters

    My Debug File: http://www.filedropper.com/hwinfo64 Also, I think the best guy for help would be the GPU-Z creator, W1zzard @ OCN he helped already a guy in creating amazing tool for RX 4xx family of GPUs...
  9. C

    Custom Polaris GPUs (RX 480) incorrect parameters

    Yep, GPU-Z power is *always* higher! I'm using only OpenCL apps - GPU load always at 100%: Note 1: GPU-Z or HWINFO always run separately w/ tested apps. Note 2: Scores in Watts are in format Average-Peak.              GPUZ    HWINFO App 1    46-53    28-37 App 2    49-55    32-38 App...
  10. C

    Custom Polaris GPUs (RX 480) incorrect parameters

    Yes, it's correct and it should be that high. As the name suggests it's for power draw of the GPU Core only. In GPU-Z it's like this (when you look at it): ...-46W-43W-46W-46W-53W-46W-53W-46W-43W-46W-53W-... So it's closer to 50W on avg - and it should be at those clocks/voltages. BTW the...
  11. C

    Custom Polaris GPUs (RX 480) incorrect parameters

    Good news! I removed old INI file and clean Registry, download 2955 version, run it and almost everything I wrote about is sorted out: VDDC is normal now and VRM's are nicely monitoring :) ... Just the "GPU Core Power" is lower than that of the GPU-Z: (both apps are at 1 sec interval...
  12. C

    Custom Polaris GPUs (RX 480) incorrect parameters

    2955 - I'll try and report. Load: As you can see from the above screen both cards are at 100% load ("GPU Utilization"). This is screen from GPU-Z (both 470 cards) along the HWINFO at 100% load: Debug File - how to make it?
Back
Top