Hi Martin, thanks for the response.
My computer was idling (no running tasks) when I took those measurements, it just seems that my motherboard clocks quite a bit lower than it should.
I may be able to increase the base clock in the UEFI to compensate, if I add 1.2 MHz to the base clock...
I have an i7 3770K in an Asrock Z77 Fatal1ty Pro motherboard, running 8 GB of DDR3-2400 RAM at DDR3-2200 per the UEFI.
HWiNFO64 v3.96-1660 shows my CPU Base Clock on the sensors page as 100 MHz and my RAM at 1100.0 (2200.0 MHz DDR3) and never deviates.
HWiNFO64 v4.16-1900 & v4.17-1912...
Thankyou so much!
I'm amazed at how quickly you implement changes and respond to people's concerns.
Thankyou also for your valuable time, I will make good use of the beta version :D.
[Edit] Well it looks like the CPU overclocking and voltage/temp monitoring software that came with my...
Hi Martin, I will sit tight and hope the Intel IRST bugs are ironed out soon. I tried the IDE Scan on Low-level IO only to get the same result.
If you could implement an option to disable the drive scan I would be very greatful (if you're busy with higher priority issues I understand...
I realise that Windows 8 is not finalised and neither are the Intel Rapid Storage Technology Drivers but as I am unable to start HWINFO64 I thought it couldn't hurt to post my issue...
Getting a BSOD when HWiNFO attempts to scan my hard drives/controllers with the message;
Driver IRQL Not...
I see - that makes sense.
Those P-states change are very fast, like you say, so it's really a non-issue.
Now that the sensors are all spot on I'm off to re-configure my LCD display, thanks Martin.
The new build (v3.55-817) is now reporting the correct fan speed - Excellent, thankyou! :)
There is possibly one other small 'bug' that I noticed.
When watching the CPU 'Clock' on the System Summary page, my QX9650's four CPU cores are showing as changing frequency independently, which is not...
Hi, I have noticed that the fan speed on my GTX280's has been reported as half speed (after version 3.36), it seems that you may have used a different divider?
I have included a report in HTML format and the debug dump if that helps :).
If you need any more info just let me know.
v3.55 Report...