When I tried put a number like 0,0100 V my bios changed it to "Auto", so I could put 0,0125 V min. or higher number in neg. offset volt. (0,3000 V is max)
By 0,0125 V I have 85% in Power Reporting Dev. I tried 0,05V but I had 80% in PRD during Cinebench.
I should have 100% in Cinebench if I...
OK, I set negative offset voltage 0,0125 V (lowest I can get) with PBO enabled - now Power Reporting Deviation is 85% during Cinebench. :D
Unfortunately with PBO my score in Cinebench is like ~100 points lower...
Well, my overclocking voltage was lower than default setting in bios. Don't know why, but my motherboard on default sets 1,46 v (in game boost mode & normal), so I lowered it to 1,38V.
Now I lowered to 1,35V and during Cinebench test Power Reporting Deviation was only 146% now... But also I had...
Could some interpret my results? I'm lost a little bit.
I have 3700X on MSI X570 Gaming Edge WiFi, overclocked manually. CPU Ratio is 42,00 (4200 MHz) with override volting 1,3875 V (it shows 1,38V-1,4V)
During Cinebench R20 Power Reporting Deviation is 160%. Is it good? bad? should I be...