red-ray's latest activity

Oh, I assumed you had GFAPI. BTW their logo has changed and is now red.

I just noted HWiNFO failed to report my GPU Temperature, Voltage, Fan RPM and Fan PWM %, how come?

Thank you, so the inappropriate Product Name has always been there. I wonder if it will get changed.

Press the [ 0:0 01 ] button that is in column zero of [Link Status], it should have a tooltip.

Hi, I just found a SIV save file with the original H1000i (PID 1C07) and it reports HX1000i as the Product Name, what does your old one...

No, but as I said, I already have one, so you would not need to. Sorry you feel you can't WFH and thank you for all the insight you...

That's true when using a program the update firmware, but not when using a flash hardware programmer such as the DediProg SF100. I...

Thank you for the clarification, if they had updated the firmware revision I could have done a workaround. Please ensure the fixed...

Thank you for the information, but this does not make total sense as looking at #post-48602 the both PSUs report the same V0.03.02...

OK and given your two report the same V0.3.2 firmware version I suspect the firmware version from the hardware is not correct. I...

There are two variants of the HX1000i, the original with a PID of 1C07 (HID\VID_1B1C&PID_1C07) which does report 230 volts when it...

I didn't expect the MegaRAID drives to get reported, but the 2 x HITACHI are simple SCSI drives which I though HWiNFO supported. Below...

I see the same effect on my ASUS Crosshair X670E Hero, I have also noticed that after I disabled power saving a Windows update...

I just noted that HWiNFO failed to report my eMMC drive, should it? I also noticed that when I hot-plug USB-SATA or USB-NVMe HWiNFO...

I was lax with my wording, given you can abort HWiNFO then clearly the system is not totally frozen, just some of the sensors. After...