Recent content by Shonk

  1. S

    Intel(R) BE200 Wireless Bluetooth(R)

    Last Post this year sorry Martin LSI SAS 9305-24i 12Gb/s HBA PCI\VEN_1000&DEV_00C4&SUBSYS_31A01000&REV_01 ASMedia ASM2824 PCIe Gen3 Switch (8 Lane Upstream 16 Lane Downstream) PCI\VEN_1B21&DEV_2824&SUBSYS_00000000&REV_01
  2. S

    Intel(R) BE200 Wireless Bluetooth(R)

    Here's another The Bluetooth Built into MediaTek MT7927 Wi-Fi 7 Wireless LAN Card (Came with Z790 Aorus Pro X) but just fitted it into my Tiny N100 box after i fitted a BE200 to the Z790 Aorus Pro X Seems to be wrongly identified as Foxconn / Hon Hai droid Composite ADB Interface
  3. S

    Intel(R) BE200 Wireless Bluetooth(R)

    Hi this PID is for the following Intel(R) BE200 Wireless Bluetooth(R) Device Manufacturer: Intel Product Name: Intel, PID=0036 Serial Number...
  4. S

    Reset to device, \Device\RaidPortXX, was issued

    I have just tested JMS583 with the latest build all is working great no crashes and such detection 100% also With regards to the USB sticks in the last post i was mistaken they dont share the same pid USB\VID_13FE&PID_6000 = Phison PS2308 (PS2251-08) USB\VID_13FE&PID_6500 = Phison PS5017...
  5. S

    Reset to device, \Device\RaidPortXX, was issued

    Thanks im not on that pc atm as im upstairs so will test later and report back I had something interesting turn up just now that you may or may not be interested in Its an AXE Speedy+ 1TB USB Stick which is a turnkey Phison USB drive (made by phison and sold badged to oem's) I have older...
  6. S

    Reset to device, \Device\RaidPortXX, was issued

    I dont think there are any processes blocking access My install is very clean without breaking anything (I would like to clean alot more out but dont want to break os features) No VBS Minimal Microsoft Chaff No Edge or webview2 etc (official removal GPDR) No Defender etc.. (Policy + DISM...
  7. S

    Reset to device, \Device\RaidPortXX, was issued

    Debug file with crash had to open Sensor Status twice whilst HWinfo was running to get a crash Opened HWinfo opened Sensor Status and closed Sensor Status = no crash Opened Sensor Status and closed Sensor Status = Crash
  8. S

    Reset to device, \Device\RaidPortXX, was issued

    Thanks Martin When closing sensor status the last two builds stall when clicking x for about a second and crash about 50% of the time Drive letters are correct in nvme and sensor status now still wrong in SCSI only two of 3 JMS583 showing in SCSI the debug file it didnt crash that time
  9. S

    Reset to device, \Device\RaidPortXX, was issued

  10. S

    Reset to device, \Device\RaidPortXX, was issued

    Hi yes the smart data is pulled now thanks there seems to be some bugs though hwinfo seems to think drive a usb stick is a partition on some drives also SCSI show's up for two of the three JMS583's with bad info
  11. S

    Reset to device, \Device\RaidPortXX, was issued

    I have just noticed another problem :) MY JMS583's dont read the smart data for some reason and show in scsi instead of nvme see images
  12. S

    Reset to device, \Device\RaidPortXX, was issued

    I just remoted into my N100 that has a Realtek 9201R plugged into it no errors and plugged in the Orico NGFF to Sata ASM225CM (With ASM235CM PID and firmware) on the pc im using atm also no errors next time i go upstairs i will grab a few drives test it more to make sure
  13. S

    Reset to device, \Device\RaidPortXX, was issued

    Ok thanks My ASM225CM shares the same firmware as ASM235CM but USB 3.x Gen2 is disabled at the silicon level via some factory lockouts I have updated its firmware and am going to changed its PID i dont like that it uses a 105x pid and id's its self as such Should i use ASM235CM PID (i dont...
  14. S

    Reset to device, \Device\RaidPortXX, was issued

    Sorry for the slow reply i have been buisy..
  15. S

    Reset to device, \Device\RaidPortXX, was issued

    Just tried 8.10 and 8.11-5526 I plugged one of each device in and tested one at a time ASM235CM Reset to device, \Device\RaidPort18, was issued. RTL9201R Reset to device, \Device\RaidPort19, was issued. ASM225CM USB\VID_174C&PID_55AA Reset to device, \Device\RaidPort20, was issued.
See more
Back
Top