I've noticed while looking through my HWInfo sensors that my +12v and GPU VRM Voltage In numbers are dropping below 12v under load. The +12v for the CPU seems to be holding up better with lows around 11.8v, but GPU 12v is dropping as low as 11.4v. Is this within spec or should I be shopping...
By the 12V you mean the 8-pin PCI Express cable from the PSU? I'm using the cable that came with PSU when I bought it a little over 6 years ago. OCZ600MXSP
https://www.newegg.com/Product/Product.aspx?Item=N82E16817341017
Thanks for your help, I thought the 120 amps were going through 12V...
I just opened up the settings to increase the polling period and it's already at 2000ms.
I'll try running it again to see if I can duplicate the problem.
Update:
Ran it again, got similar high max amperage readings.
https://pasteboard.co/HGD2Fpc.jpg
I'm running hwi_589_3520 on Windows 7 64-Bit. Radeon RX 480 GPU.
I ran a Unigene Valley Benchmark a little while ago and when I was going over my temperatures and power draw I saw something that didn't look right to me, but I'm far from an expert on electrical stuff.
I have a screen shot...