Search results

Tried but still can't get a constant voltage. Mostly fluctuates between 2 values where the second is what I set in GPU tweak.

HWiNFO reports always 1.226 V with the default settings doesn't matter which DPM state is currently active. If I lower or increase the voltage GPU Monitor -> HWiNFO reports these: 1175 ~ 1187 mV -> 0.464 V 1187 ~1200 mV -> 0.451 V 1237 mV ( I set 1250 in GPU Tweak) -> 1.251 V 1250 mV ( I set...

That is constantly 1.226 V if I don't change the voltage. Do you need an SMBus or HWiNFO dump from ASP1106D after I change the voltage with GPU Tweak ?

Yes the GPU Voltage in mV is the current GPU voltage which is changing all the time. I tried to force the GPU clock according to the original DPM states so I can get stable values: DPM0 - 300 MHz - 850 mV DPM1 - 635 MHz - 850 mV DPM2 - 770 MHz - 937 mV DPM3 - 875 MHz - 1000 mV DPM4 -...

When I don't use ASUS GPU Tweak to change the voltage it shows constantly 1.226 V (probably this is the highest DPM state's voltage which is 1.25770 V) meanwhile the GPU changes P-Sates and voltages and GPU Tweak can monitor them correctly, From the GPU register dumps: When I change from...

No it's not there attached the debug file. EDIT: Ok I found the problem, the GPU was in idle state. When I forced the highest DPM state the voltage monitor showed up. But when I lower the voltage (even with 0.001V) using ASUS GPU Tweak it shows incorrect values. Now it works even when the GPU...

After disabling "GPU I2C Caching" the label showed up but still no values:

Is voltage monitoring enabled in the latest v4.43-2290 Beta ? It's not showing up. I already tried to reset my layout but doesn't work. Also uploaded a debug file.

Hello! I know it's not a bug because this is a custom design by ASUS, but If it's posssible to add missing sensor readings like VDDC Voltage, VDDC Current I'd like to help. The reference card (in case of both 7790 and 260x) has the NCP81022 voltage regulator, ASUS used a different one...

For me that sensor shows 15C when ET6 26C. Looks like it reads 10C less compared to ET6 on lower temperatures, but reads exactly the same at 40+. Thanks!

Hello! Everything is ok except the CPU/GPU temperatures, since it's an APU I know there aren't so many sensors, and they are also reporting incorrect values sometimes. In my case HWiNFO reported CPU package 100C under load, that would be impossible since max cpu temp is 74C, the CPU will...