Search results

  1. K

    MSI MEG 570X ACE Reported CPU Temps

    I'm looking dumb again! But...which is more accurate in your opinion the Ryzen stuff or the MSI MEG stuff? I want to believe the MSI MEG values since the CPU(2) and Vcore values are a little lower.
  2. K

    MSI MEG 570X ACE Reported CPU Temps

    Attached is a screen shot of HWInfo64 v.6.14 showing the reported temps for the 3800X CPU after running Cinebench R20. Note the difference in the CPU temps AMD Ryzen and MSI MEG. I assume the AMD Ryzen temps are close to correct. What is going on with the MSI MEG reported temps? They do not...
  3. K

    Ryzen System Memory Temps

    I don't know if this is a minor problem or not but...on my Ryzen Taichi X370 and ROG Hero VII X470 systems the memory temperatures show for Dimm[2] and Dimm[3].  On both systems the memory is installed in Dimm[2] and Dimm[4].  Never noticed since there is no memory temps showing on my ASRock...
  4. K

    Ryzen 2700X/Hero VII fan issue

    Still trying to get you a screen shot!
  5. K

    Ryzen 2700X/Hero VII fan issue

    Here you go. Oops, looks like pdf files don't work?!  I'll have to rerun handbrake and create a new screen shot. Ok, I reran Handbrake to create a good screen clip and the problem did not repeat!!  HWiNFO64 showed the Radiator fans returning to normal after Handbrake was done doing it's...
  6. K

    Ryzen 2700X/Hero VII fan issue

    Yes, that fixed the problem with the EVGA CLC AIO. However in the meantime, I got frustrated and installed a custom cooling system with a PWM Swiftech pump and a couple of Vardar fans on the radiator.  The system runs a couple of degrees Centigrade cooler with the custom setup. ...
  7. K

    Ryzen 2700X/Hero VII fan issue

    I just built a system using the ASUS ROG Crosshair Hero VII motherboard and an AMD 2700X processor.  I'm using an EVGA CLC 280 AIO.  Everything seems to work as advertised EXCEPT when I start HWInof64 the fans on the cooler ramp up for no apparent reason - nothing is running except other than...
  8. K

    AMD Ryzen 1700X/ ASRock X370 Taichi

    Like I said, I was looking (searching forum) in all the wrong places.  Based on your comments above I finally stumbled into the Ryzen/Asus thread.  I can only assume the Ryzen/ASRock Taichi information is similar.  Anyway, thanks for the quick response - you made me search the forum until I...
  9. K

    AMD Ryzen 1700X/ ASRock X370 Taichi

    Am I looking in all the wrong places for the Ryzen 1700X core temperatures?  I'm using version HWInfo64 version 5.52.3161.
  10. K

    Voltages Differences?

    Yes, and I appreciate the information.  The only thing I was trying to show is CUPID says the VCore is ~1.178 under load and HWiNFO says the VID is ~1.211 under load.  Maybe the two programs are looking at the VID at slightly different times and that's the difference?  Although reporting the VID...
  11. K

    Voltages Differences?

    This is what happens under load?  Aida64 fluctuates between 1.178 and 1.212 and HWiNFO fluctuates between 1.192 and 1.240 while running IBT.  CPU-Z is not in the game?!
  12. K

    Voltages Differences?

    I have been playing with my Z97 Extreme6/4790K system trying to get it to run "cool" at 4.6 GHz.  In doing so I have been trying to figure out how to control the Vcore using the Adaptive method.  I think I'm getting to where I want to be but stumbled upon the different voltages being reported by...
  13. K

    ASRock Z97 Anniversary MB Vcore sensor

    Your probably right. I wanted a simple MB with no frills for a simple machine. I guess that's what I got! Thanks for the response.
  14. K

    ASRock Z97 Anniversary MB Vcore sensor

    Here's a couple of screen shots.  CPU-Z Core Voltage jumps from .871v to 1.20+ depending on what is running at the time.  I'm not an I-Tune fan and I guess it doesn't show Vcore just the Adaptive Settings?
  15. K

    ASRock Z97 Anniversary MB Vcore sensor

    I don't know if it's just my system or is there something about the ASRock Z97 Anniversary MB/G3258 that does not want to show the Vcore sensor in HWiNFO64 version 5.20?  No big deal other than I thought I turned off Monitor and Display by mistake but it ain't there or at least where it's...
  16. K

    HWInfo and Corsair Link?

    Unbelievable, I did the "Reset Preferences" again and looked in the Registry and it was cleared out! HWiNFO is now working correctly! I don't know what I did differently the second time around except I had gone in and enabled a couple of the sensors individually per your suggestion. Oh well...
  17. K

    HWInfo and Corsair Link?

    I tried the "Reset Preferences" from the main HWiNFO settings and it had no effect. I can go in an enable each sensor and that seems to work. I can then play with "Monitor" and "Show" in the Layout tab. However, there are many that I would have to set one at a time. Is there some way to...
  18. K

    HWInfo and Corsair Link?

    I installed a Corsair H100i GTX and the Link software recently.  I then tried to load HWInfo64 and got a message that it was not compatible with the Link Software.  I then updated HWInfo64 to the latest version (5.20) and it flashed a comment about being OK with Corsair Link (I think?).  But as...
Top