Search results

  1. B

    Missing Sensors v5.79.3390

    OK, thanks, yes, they are all back with 3391!  :)
  2. B

    Missing Sensors v5.79.3390

    Bunch of sensors not showing up. Have custom names. I cleared the sensor cache and tried again, but same results. Attached pictures of the missing...
  3. B

    Missing EVGA GPU ICX in in latest version(s)

    Hi Martin, yes, did check it and I believe it works the way you would like. IE: No Corsair info if CorsairLink... is unchecked. With it checked it works as it has previously, ie: I still get my PSU fan and all other Corsair info. (and no complaint messages, etc running both at the same time)...
  4. B

    Missing EVGA GPU ICX in in latest version(s)

    OK Thanks. Will have a look when it comes out and report back.
  5. B

    Missing EVGA GPU ICX in in latest version(s)

    Hmm... once again it seems to have left off the dbg...
  6. B

    Missing EVGA GPU ICX in in latest version(s)

    Hmmm... It might be something odd with my setup here? Asus x99 Deluxe II. I just ran the 3310 and as I noted ICX and Corsair work well. Only issue is Corsair PSU Fan (HX850i) shuts off when HWi runs. Simply starting CLink4 or if it is running right-click the tasktray icon and select my custom...
  7. B

    Missing EVGA GPU ICX in in latest version(s)

    I start hwi, make the changes you ask for,  close hwi I then delete any previous debug file,  then restart hwi,  close hwi,  then send the dbg file. Let me know if I should modify this? Also, the sweet spot is v3310. It reads both the Corsair and the ICX info.
  8. B

    Missing EVGA GPU ICX in in latest version(s)

    OK, here's the dbg, I had it open, clicked on Debug Mode, then clicked on GPU I2C Caching, then reset the above. Wasn't sure if the GPU checkbox was to be checked or not.
  9. B

    Missing EVGA GPU ICX in in latest version(s)

    Thanks Martin. I tried those options but it did not change the Corsair Link options, they all show up but the PSU Fan. There was no ICX info on either of the two most recent builds. I went back thru some versions and found - hw64_571_3310.zip is the last one where it seems to be fine with...
  10. B

    Missing EVGA GPU ICX in in latest version(s)

    Here's two debug files. One with Corsair checked, the other without. The Corsair info appears in either one.
  11. B

    Missing EVGA GPU ICX in in latest version(s)

    Everything is the same. Trying the new Corsair option under Settings/Safety I actually see no difference. Checked and Unchecked seem to be the same. The Corsair items are all still there in both and as previously, the running PSU fan is turned off if it is spinning (with or without CL running)...
  12. B

    Missing EVGA GPU ICX in in latest version(s)

    Strange because I can consistently get the ICX info in 3235 but not in the latest, which is where I noticed it missing. But I haven't used the older version yet without the ICX info being there so it was consistent back when. As to the Corsair. I consistently have the Corsair info in there in...
  13. B

    Missing EVGA GPU ICX in in latest version(s)

    Hi Martin, It's the ICX special info, and includes the extra 9 sensors and both gpu fan readings. I'm not sure when this stopped, but it was some recent version ago. I set things back to stock (bummer, lost many of my customizations) but I do have a .reg file I can try loading again. I...
  14. B

    Corsair AXi Sensor group sometimes missing until restarting HWI

    My Corsair fan still stops every time HWi starts. I have a new piece of hardware I'm going to try next week to see if I can get that to stop, but I never did find the answer.
  15. B

    HWinfo - 5.56-3230 Turns of Corsair PSU Fan!!

    OK, I've attached the two files requested. I think I got it right. I had HWi off with Corsair running. Started HWi and waited quite a while for it to load. Saw the new file. Clicked on Report and created one. Let me know if I need to do it different / etc... thanks for your time. b
  16. B

    HWinfo - 5.56-3230 Turns of Corsair PSU Fan!!

    <<Does this problem also happen if you close CL4 and then start HWiNFO ?>> Yes, seems to. I have them both run at Windows startup. CL4 is nice enough to keep the fan running when you close the software (unlike EVGA XOC, which shuts down the fans / OC if you exit the program). However, the fan...
  17. B

    HWinfo - 5.56-3230 Turns of Corsair PSU Fan!!

    I just booted to a different Windows 10 which had hwinfo v5.55.3220, seems that turns off the corsair fan also.
  18. B

    HWinfo - 5.56-3230 Turns of Corsair PSU Fan!!

    I'm running Corsair Link4 to power up the PSU fan during summer. It's hot here in SoCal. Each time HWinfo starts it turns off the PSU fan if it's been running. Corsair Link 4 - 4.8.0.82 HWinfo 5.56.3230 PS: As a rant, why don't EVGA and Corsair do the right thing and allow us to set fan...
Top