Search results

  1. red-ray

    Memory leak (HWiNFO using 10G memory)

    My testing shows it is fixed in 471.11 :)
  2. red-ray

    Memory leak (HWiNFO using 10G memory)

    I have checked all of the 460.79 and later drivers and none of them fixed this including V470.25 (bugfix_main) which is what get's used on the latest Windows Insider Build 21390. I just checked bug 3216492 and it now says Versions Fixed After: 460.81 (R460_00), 465.34 (R465_00), 470.23...
  3. red-ray

    Memory leak (HWiNFO using 10G memory)

    It looks like after 5 months NVidia might have fixed it
  4. red-ray

    Memory leak (HWiNFO using 10G memory)

    I have logged https://partners.nvidia.com/bug/viewbug/3216492, but you probably need an NDA account to see it.
  5. red-ray

    Memory leak (HWiNFO using 10G memory)

    From which driver version did the leak start? I know they broke nvmllInit_v2() with the 460.79 driver so can you check if you still get the issue with the 457.51 driver? They fixed nvmllInit_v2() with the 460.97 driver...
  6. red-ray

    HWiNFO64 Causes RAM Lighting issues with Patriot Viper RGB 3600mhz

    Do you get this effect if you run my SIV utility (rh-software.com)? It would be useful if you attached the two Menu->File->Save Local files so we can see all the SMBus devices (Menu->System->SMB Bus) and which utilities use the locks (Menu->Help->Lock Handle)
  7. red-ray

    News coolers of corsair

    Where are you starting from, is there already support for the older Corsair Platinum cooler? If not which HID devices does it support? I don't think the HWiNFO forum is an appropriate place for me to help you and feel email would be better.
  8. red-ray

    News coolers of corsair

    Thank you, I expected it would work, but it's always good to check.
  9. red-ray

    News coolers of corsair

    Thank you for the ID, I guessed it would be 0C20 so SIV 5.46 (http://rh-software.com/) should report it OK once you close down iCUE, does it please?
  10. red-ray

    News coolers of corsair

    Thank you for checking this out. Basically the RGB Pro XT uses the same protocol as your old RGB Platinum. From [Lock Handle] I can see just SIV was running, have you tried with both HWiNFO and SIV reporting the RGB Pro XT at the same time? I expect all will be OK and if there are issues then...
  11. red-ray

    News coolers of corsair

    I echo Martins comments about Corsair and also have a SIV that should report it, please will you try it? To do this do Menu->File->Download->SIV Beta to get SIV 5.45 Beta-05 or later and post Menu->Tools->Link Status + Menu->Tools->Link Limits so I can check all is OK. There is also a H100i...
  12. red-ray

    Corsair H115i Platinum doesn't show in HWiNFO64 6.02

    Please ask about SIV on http://rh-software.com/siv-support and see https://siv.boards.net/thread/13/siv-corsair-vengeance-rgb-memory
  13. red-ray

    Corsair H115i Platinum doesn't show in HWiNFO64 6.02

    Thank you for the screen shots and all looks good to me, do Menu->Tools->Maximum Lines->Set nn Lines to tell SIV how big to make the panels by default. SIV can control the HX850i fan + CLCP fans + LEDs and can also treat the 4 x 16 fan LEDs as 1 x 64 so you can move patterns for fan to fan. I...
  14. red-ray

    Corsair H115i Platinum doesn't show in HWiNFO64 6.02

    Thank you for running the test and if you get a chance over the next few days it would be good if you posed both [Status] + [CPU Burnin] as I would like to see how the cooler does. A 10 minute [CPU Burnin] would be fine. Remember to have both HWiNFO + SIV active.
  15. red-ray

    Corsair H115i Platinum doesn't show in HWiNFO64 6.02

    There is no Average, Minimum or Maximum as the fan speeds have never changed, not even by 1 RPM  :huh: Yes please, leave both running for >= 30 minutes then post [Status]. I suspect running Menu->Machine->CPU Burnin would get the fans to speed up. There will be a Beta-27 later, but the...
  16. red-ray

    Corsair H115i Platinum doesn't show in HWiNFO64 6.02

    Thank you and don't worry, compared to many your testing has been exemplary. I can see all the AIO counts are 399 so am now happy with how well SIV is reporting and pondering H115iPt control. It would be worth checking all the counts remain in phase with HWiNFO + SIV active and also both...
  17. red-ray

    Corsair H115i Platinum doesn't show in HWiNFO64 6.02

    Thank you for running the test, but you posted the wrong screen shots, they are [Link Status] ones from a couple of days ago. Looking at one in the save file all looks good with one SIV active. [Status] will look similar to as below and what we need to check is that all the highlighted Sample...
  18. red-ray

    Corsair H115i Platinum doesn't show in HWiNFO64 6.02

    Thank you, progress at last :cool: . I think I know why the LEDs stay on, but can we double check? 1) Do siv64x -dbgaio | find "H115iPt" > SIV_DBGOUT.log | more to run SIV (don't have HWiNFO active) 2) Leave SIV running for 10 minutes. 3) Generate the save files. 4) Press [Status], take a...
  19. red-ray

    Corsair H115i Platinum doesn't show in HWiNFO64 6.02

    With SIV you can set the polling interval, see -UPDATE on the [About] panel. Given this what happens to the lights if you do as follows? siv64x -update=2:20 or maybe siv64x -update=2:30 I don't need and files, just to know what happens to the lights. Beta-26 is there so just use that...
  20. red-ray

    Corsair H115i Platinum doesn't show in HWiNFO64 6.02

    Thank you and having the log as ideal.  Doing GetPumpFan (248) looks to be a step backwards, so Beta-25 will reverts to doing GetStatus (0). I suspect as to what lighting effect is set will not really affect the outcome, but what happens to the lights once you exit SIV/HWiNFO? Do they come back?
Top