Search results

  1. T

    Aorus RTX 3080 Xtreme 8-pin #2 Voltage

    Hi Astral, the "electrical resistance" can be anywhere between power supply and voltage sensor: maybe first plug power supply -> cable, or second plug cable -> graphic card, or soldering point. I think soldering point, because "this has changed" and since soldering with lead is forbitten...
  2. T

    Aorus RTX 3080 Xtreme 8-pin #2 Voltage

    Hi astral, the ATX specification says the following: ATX 12V power must be between 11.4 V and 12.6 V (ATX 12 V +/- 5%) So, your 11.5 V is still within specification. I think it can be your soldering. Let's have a look at the power consumption; a RTX 3080 consumes max 340 Watts. 75 Watt can be...
  3. T

    LogViewer for HWINFO is available !

    New Version 6.2 Hi all, I built a version 6.2 with the following new features: Selection of log-application via command-line-argument Optional file "GenericLogViewer.cla" for better "Open with ..." Adjustment of hot keys All "value checks" are disabled (gone) Selection of log-application via...
  4. T

    Frequent PC crashes on Apex Legends

    Hi shoegaze_ibex, in your first logfile you have many "Performance Limit" = YES entries (e.g. "Performance Limit - Reliability Voltage"). I don't know exactly what this means, but it doesn't sound really good (value "1" = "YES") Tip: play Apex with "low graphic settings", to reduce power...
  5. T

    Is My PSU Failing?

    Hi kenvme, yes, check your voltages! Take this Thread as a reference what to do ... Regards Tom
  6. T

    LogViewer for HWINFO is available !

    Hi all, edhunter asked for previous version, because "selecting category by typing letters" conflicts with new "single letter hotkeys" of version 6.1. (e.g. "C" or "H"). Maybe in next version I will add prefix-key "Ctrl" to the single letter hotkeys to remove conflict. Hotkeys will be "Ctrl+C"...
  7. T

    Random crashing under load, new system

    Hi SeaLabEZF, I had a quick look at your logs and there is one category which can be a problem: Is this the "power of GPU" (cable voltage) ? If yes, it's too low: an ATX 12V power must be between 11.4 V and 12.6 V (ATX spec: 12 V +/- 5%) Please check your GPU power cables. Do you use a...
  8. T

    Help wanted: Strange crashes within minutes of starting up a game

    Two things: voltages are within ATX-spec but there can be high current-peaks which we don't see in the logs you have only 8 GB of RAM, "Physical Memory Load [%!" is close to 70% -> there happens "some swapping with virtual memory". Don't know how "sensitive your game for time critical...
  9. T

    Feature Request: Add "Logging" settings page.

    One tipp: use standard logging settings and have a look at the log-data with Generic Log Viewer ;)
  10. T

    Some Help with random shutdown?

    If problem still exists, do some gaming with "lower graphic settings" to reduce the power consumptions of GPU (and CPU). GPU power should be less 200W, or even better 100-150W. To check if there is a power problem or not ...
  11. T

    Some Help with random shutdown?

    Hi Marcodian, OK, I had a quick look at your logfile and ... hm ... it could be that you have a "power problem" (?): Your GPU power has a big range 11.64 V ... 12.24 V, which is still within ATX specification and a Seansonic 850W should have enough power, even GPU is taken 300W (but 11.64 V...
  12. T

    Some Help with random shutdown?

    ZIP the log-file (.zip) or rename it to ".txt", then it can be uploaded.
  13. T

    LogViewer for HWINFO is available !

    Hi chevron, yes, could be a solution, I think best will be a CheckBox in the "Edit"-menu. But I had a look at the code and there are less value checks existing as I thought: HWINFO only log-categories with unit [FPS] are checked. If value is > 500 FPS, previous value is taken. I do this...
  14. T

    LogViewer for HWINFO is available !

    Hi all, first of all: I think this is not the right place to discuss GPU-Z problems, better will be there. But OK, let's finalize the discussion here. Problem is clear: up to an "End-Time" of "0:16:46" diagram looks normal, starting with End-Time "0:16:47" it doesn't. That's the border where I...
  15. T

    LogViewer for HWINFO is available !

    Hi edhunter, you are absolutely right. I didn't think of that at all, because I never use the "Search in ComboBox" feature. Btw: it's not a bug, it's a feature ;). The program does what it was programmed to do. But you can type "Shift+C" (capital letter C), this still works. The "problem" will...
  16. T

    LogViewer for HWINFO is available !

    New Version 6.1 Hi all, I built a version 6.1 with the following new features: Style your own Generic Log Viewer MainWindow ... if you like Diagrams can now be "locked" (for "Change all" buttons with SMART-functionality) Some new "Hot-Keys" are implemented Compatibility with HWINFO Date/Time...
  17. T

    Troubleshooting plea for help

    Still for explanation: you are right with the assumption that there are "no log values form 9:20 - 10:00", because system hangs: no logs for 36 seconds !
  18. T

    LogViewer for HWINFO is available !

    Hi ztmgamning, yes, you are right, but your problem is very simple: you can't use the same character "," (comma) as column separator AND decimal separator That's the case in your "sep_comma.csv" file. I think the default setting of these two parameters depends on the "Windows Language...
  19. T

    LogViewer for HWINFO is available !

    Hi ztmgamning, strange, the last line of your logfile contains 523'450 (!) Spaces or something else, I removed this line -> now it's fine ! But the values seem not to match with the columns definitions. If you open logfile in Excel, you can find e.g. a "Physical Memory Load" >10'000 %...
Top