Search results

  1. D

    NZXT Kraken X53 not showing up

    It turns out the new Kraken AIOs do not have a header for the rad fans. NZXT says in a guide to connect the rad fans to a Mobo header for power and control. Really weird that they removed that.
  2. D

    NZXT Kraken X53 not showing up

    Works like a charm now. I am gonna get back to you as soon as I try connecting the fans in to the AIO. Thanks a lot!
  3. D

    NZXT Kraken X53 not showing up

    I'm afraid I can't do that. The value is always 32C no matter what. I tried putting some load into it and saw from CAM that the liquid temp was at 35C
  4. D

    NZXT Kraken X53 not showing up

    I can verify that the pump speed is correct but the liquid temp remains at 32C and it is not changing. I might try connecting the fans directly in to the AIO later today and let you know.
  5. D

    NZXT Kraken X53 not showing up

    I attached the new Debug file. The correct values taken from CAM were at the moment: Liquid Temp: 32C, Pump: 2189rpm. I do not have fans attached to the AIO but rather to the motherboard directly so CAM doesn't report any fan speeds
  6. D

    NZXT Kraken X53 not showing up

    Thank you. I can now see it in the Sensor Status but the values are completely off. If I have CAM open the fields are grayed out. Anything else I could try?
  7. D

    NZXT Kraken X53 not showing up

    Here it is.
  8. D

    NZXT Kraken X53 not showing up

    Hi there, I recenlty installed a Kraken X53 in to my system and I cannot see any information about it in HWinfo. I tried with/without NZXT CAM installed with no success. My Corsair H115i is showing up correctly always. Are the new Kraken AIO's supported? Thanks!
Top