temperature

I own a R12 Alienware computer and was wondering why the temperature would be constantly different in your software and the Dell's command center. Currently the Command Center is reading 59C for the CPU and HWinfo is reading 51C in the CPU Package. It's almost always off by 7 or more degrees and...

Hi, recently I bought a new laptop - asus tuf gaming a17 (FA707RE with ryzen 7 and 3050 ti). I'm using HWmonitor to monitor it's temperatures. Overall the program works well but what caught my eye is the THRM temperature. When ingame, it's at ~95°C constantly (other components show way less...

I have an Nvidia 2080 Super -- I finally figured out what was going on. At first I thought it was when I updated HWiNFO64 that caused the decimal digit to reset, but it's actually whenever the GPU Driver itself gets updated. I use the GPU Temp field in my custom overlay, but whenever the gpu...

As you can see from the image below, I had HWiNFO64 open and minimized to tray for a while. Wasn't playing games or anything but when I opened it back up it showed that the Maximum CPU Die (Average) was 104.2c. How could this be possible? As you can see from my other temps from the sensors...

My brother has a 3080 ti strix, and I'm interested in learning where the reading for GPU Memory Junction Temperature is located—is it on the front side where the GPU die is located or is on the back of the GPU?

Hi, I have encountered recurring issue that when hwinfo is starting with Windows 10 startup, it usually does not load the sensors on my nVME Samsung SSD 970 EVO, especially temperatures. If I then manually shut hwinfo down and run it again, it is shown. I have configured hwinfo to gather logs as...

https://www.hwinfo.com/forum/threads/2-graphs-in-1-window.2626/ This thread is quite old, and i searched but didnt find anything. Could anyone let me know if it's possible to merge two graphs onto one? I want to display 2 graphs of different colour on the same grid Thanks

Hello everyone, in these days I had some problems regarding CPU/GPU temperatures after a re-paste. I used thermal grizzly thermal paste and I changed some thermal pads too. I tried many times and I was not able to do anything better than these results...

The memory is not detected in 4 of 8 slots and 4 temperature sensors are missing in the standard DIMM list in the HWInfo sensor section, however the IPMI section shows temperatures for DIMM A,B,C,D,E,F,G,H. Also in the HWInfo main pane the DIMM information only shows information for DIMM...

So my MOBO is a gigabyte 970a-ud3p (v1.0) is not the (v2.0) and for what I can asume temp 1 is system temperature because always stays really steady and reports basically my ambient temperature within +2 to +4 °C and I don't even know where the sensor is but I don't care that much about it, but...

Hello, I am not sure where to post about it yet, so I came here. A couple days ago I had a first time occasion to stress-test my cpu (R5 3600) in occt. Before stressing it, I checked out some temperatures the program was detecting. What peaked my intrest was a sensor named "Temp2" on the mobo...

I have R7 3700X and the temp sensors listed are: CPU(Tctl/Tdie), CPU(Die average), CPU CCD1(Tdie). Does any sensor in hwinfo report IO die temperature? Does CPU(tctl/tdie) report highest temperature only for CCD or for CCD and IO Die? Is "CPU(die average)" average value of CCD and IO die, or...

Can I check IO Die temperature? I need it in order to make sure that I applied thermal paste properly. Other than that: How many temperature sensors has Ryzen 7 3700X CCD? As far as I know there's only one CCD in 3700X. About sensors: Is CCD1 the highest temperature measured for CCD chiplet...

Hi, I have an M.2 SSD that I recently migrated to a new motherboard and case. When I was checking all the new hardware and CPU temps I noticed a very large discrepancy between the SSD drive temp 1 and temp 2. I had read that they measure different parts of the drive, but I'm not super well...

Just got a new Lenovo laptop with the new Ryzen 5 4500U processor using integrated Vega graphics. Occasionally HWiNFO64 reports 'GPU Temperature' and 'GPU Clock' values to peak at absurd values. Other clock or temperature values seem to be consistently correct, though. I have not been able to...

I am not sure if it exists already, but it would be great to show statuses in the system tray, based on conditions (especially for temperature). For instance, to not displaying anything when the component temperature is not greater than 50 degrees. It would allow having fewer icons displayed at...

Hi i downloaded hwinfo to know the temperature of my pc but i dont know wich cpu temp i should watch. Sorry for the screenshot i dont know how to cut correctly the picture

After some time of playing, a hour or so, my "Cpu Die (average)" stats will get greyed out, is that a normal thing? What does that mean? Thanks in advance

I am trying to find the core temperature, but it is crossed out (see picture). Is this bad? How can I enable it? It is not disabled in settings. My mobo is the Asus Prime B450-Plus if it helps. I do not remember this happening before, and a reboot doesn't fix it. I haven't changed anything in...

Hey Martin, I found a weird bug after upgrading to a 2080 ti from a 1080 ti. The VRM temperature/fan report in the list is frozen. I'm not sure if it is my GPU or your program however. It worked fine from when I got the card last week until now. Not sure what changed. I updated my drivers like...