Broken PCIe speed detection since v7.0 for 970 Evo Plus

[kidi]

Testing the latest beta 6.43-4385 - speed detected as intended


After the v7.0 update

 

[kidi]

7.00 - debug file https://www.mediafire.com/file/2ggtf2lbjpde14f/HWiNFO64.DBG/file
7.00 - report file https://www.mediafire.com/file/n7433369xmvaxpa/3950x_report_nvme_speed_broken_7_00.MHT/file

 

[kidi]

6.43-4385 - debug file https://www.mediafire.com/file/95jhlcvcugnjnj5/HWiNFO64.DBG/file
6.43-4385 - report file https://www.mediafire.com/file/uj9t0cjnjbytesf/3950x_working_speed_detection_pre-7_00_beta.HTM/file

 

[Martin]

Thanks for the report. The latest versions take also PCIe switch limits into account.
I see now where the issue is, shall be fixed in the next build!

 

[kidi]

Thanks! I have also noticed that DEBUG MODE is broken/freezes if hwinfo is running from the UNC path or network share. Moving it back to physical disk solves the problem.

 

[Martin]

You might want to disable the "Debug Write Direct" option for such case.

 

[kidi]

 

[kidi]

You might want to disable the "Debug Write Direct" option for such case.

That works. Thank you again!

 

[steviejay]

I have noticed this in build 7.00-4400 as well. All three of my NVMe drives show 0x multiplier when tested (I know they are x4 (3) respectively).

970Evo, SPCC m.2 PCIe SSD, MP600.

 

[Martin]

It was already fixed in version 7.01 Beta.