Eaton Ellipse ECO series UPS Support

MfA

Member
Hi,

Is it possible to have included the output load, battery capacity figures in the HWinfo64?

Regards

1669287505038.png
 
We have no information about protocol used by this device but can try a common UPS protocol.
What USB VID/PID does that device use? Should be visible in Device Manager under Details - Hardware ID or in HWiNFO.
 
  • Like
Reactions: MfA
We have no information about protocol used by this device but can try a common UPS protocol.
What USB VID/PID does that device use? Should be visible in Device Manager under Details - Hardware ID or in HWiNFO.


Code:
Device settings for USB\VID_0463&PID_FFFF\000000000 were migrated from previous OS installation.

Last Device Instance Id: USB\VID_0463&PID_FFFF\000000000
Class Guid: {b156a13a-a690-11de-83db-8faf55d89593}
Location Path:
Migration Rank: 0x0
Present: true

1669301278075.png
 
This device is already on the list in HWiNFO for UPS support. Does HWiNFO show some UPS data in sensors?
 
  • Like
Reactions: MfA
This device is already on the list in HWiNFO for UPS support. Does HWiNFO show some UPS data in sensors?
unfortunately there's no sensor info about the device. My previous UPS' (APC) sensor info were located at the bottom of right column:

1669301876429.png

179 hidden values are not related to UPS FYI.
 
For some reason this device doesn't expose the HID interface. I assume it's not listed under "Human Interface Devices" in Device Manager.
 
  • Like
Reactions: MfA
For some reason this device doesn't expose the HID interface. I assume it's not listed under "Human Interface Devices" in Device Manager.

There're some HID-complient consumer control device et al but no further info once i clicked them.

1669314349401.png
 
Back
Top