HWinfo "1.0V VOUT Voltage" reading up to 1.8v , Corsair DDR5 (CMK32GX5M2B5600C36)


New Member
HWinfo "1.0V VOUT Voltage" reading up to 1.8v

Hello everyone, can anyone help by taking a look at your reading in HWinfo scroll down to "DDR5 DIMM [#1] (BANK 0/Controller1-DIMMB2)" or your equivalent and take a look at "1.0V VOUT Voltage" mine is spiking to 1.8v !

I tried bios default setting and XMP setting ( current ) both have the same reading for this particular field ( 0.990 then straight to 1.8 ).

I tried updating bios went from 7d32vh91 to 7d32vh90 , bios version 7d32vh91 ( maybe BETA version ) looks newer but the date was older and I can't find it on msi support page anymore but this is just a side note, now I'm on latest 7d32vh90, "1.0V VOUT Voltage" before and after updating the bios is the same.

No OC just undervolting CPU , my PC is stable since I purchased it , today after updating the bios I had a freeze while CPU-z was loading and HWinfo was open I don't remember it happened before but I'm not concerned for this particular issue.

changed to different RAM brand and the voltage became 1.005v , then changed to new set of the same exact brand ( CORSAIR (CMK32GX5M2B5600C36)) and the symptom of voltage spike happened in the same way, I'll send a ticket to Corsair support to see what'll they suggest, maybe Corsair have custom-made power delivery circuit that HWinfo can't read it properly.

Processor Core i7 13700K
Motherboard MSI Z690 Tomahawk WiFi
Cooling ArcticFreezer 420
Memory Corsair VENGEANCE® 32GB (2x16GB) DDR5 5600MHz C36 (CMK32GX5M2B5600C36)
Power Supply Corsair CS750M
See here: