HWiNFO confusing HDD and SSD names for the activity categories in sensors window

Opptur

Member
Hello! I have observed that HWiNFO confuses the names of my SSD and HDD in the Sensors window. The names of the temperature categories for the drives are correct (first 2 categories in the screenshot), but the names of the activity categories are the same (showing the SSD's name). The first one should be the SSD and the second one should be the HDD. The values are displayed correctly, but the category names are wrong.

The problem persists in HWiNFO 5.71-3330.
 

Attachments

  • HWiNFO64_2018-01-29_19-45-34.png
    HWiNFO64_2018-01-29_19-45-34.png
    97.8 KB · Views: 6
  • hwinfo64.HTM
    153.4 KB · Views: 0
  • HWiNFO64.DBG
    1,018.8 KB · Views: 2
I have already mentioned that the issue is present in 5.71-3330 as well.
 

Attachments

  • HWiNFO64_2018-01-30_15-49-20.png
    HWiNFO64_2018-01-30_15-49-20.png
    102 KB · Views: 3
  • HWiNFO64.DBG
    1.8 MB · Views: 1
5.72-3333 doesn't fix the issue. The names are different now but the activity values are inversed (the Read/Write Speed etc. are inversed between the HDD and the SSD).
 

Attachments

  • hwinfo64.HTM
    154.2 KB · Views: 1
  • HWiNFO64.DBG
    1.9 MB · Views: 1
Everything seems to be fine now. I mean, the order of the drives for the activity sensors is different from the order of the drives for the temperature sensors, but I don't think this is an issue. Thank you! :)
 

Attachments

  • HWiNFO64_2018-01-31_23-10-32.png
    HWiNFO64_2018-01-31_23-10-32.png
    98.3 KB · Views: 5
Back
Top