HWiNFO32 v7.10-4540 bluescreens Windows ME when launched twice

Kahenraz

Member
Tested on Windows ME, a blue screen will occur when HWiNFO is launched, closed, and launched a second time.

System is very basic, 440BX chipset with Celeron 500mhz and 256MB of memory.
 
Could you please capture the BSOD in the HWiNFO Debug File (enable Debug Mode) and post it here for analysis?
 
Sorry. I just realized I posted this in the DOS section by mistake.

See attached for debug files.
 

Attachments

  • 440BX.zip
    14.3 KB · Views: 3
Thanks for the quick response. I'll be happy to test this when it's released. I confirmed this bug on another 440BX by a different manufacturer as well.

What did the debug information show that helped identify the issue?
 
It has shown that the problem was in detection of the SIO chip. If HWiNFO detected the Winbond chip but left it's config space unlocked, a new start and check for another SIO at the same I/O location would cause the issue. I believe that putting the SIO back into locked state after detection will solve this problem. That's what the next build of HWiNFO will do.
 
Back
Top