hwinfo64.exe便携版打不开，以前还是正常的

Check in Event Viewer if you see an error reported.
You might also enable Debug Mode with earlier version, then run the Beta and provide the HWiNFO64.DBG it created.
 
以前
v8.02
Released on May-07-2024
正式版本的

hwinfo64.exe打不开​

，没有错误报告，
只能打开英文版的hwinfo32.exe，debug mode只能在hwinfo32.exe中打开，然后呢
 
Which language do you use?
You can edit the HWiNFO64.INI file and try to change:
Lang=en
If that will help.

Or add into the INI to activate Debug Mode:
DebugMode=1
 
简体中文，添加DebugMode=1后保存，还是打不开，无论是以管理员身份还是设置兼容性，就是打不开

hwinfo64.exe1716368367626.png​

 
Did it produce a HWiNFO64.DBG file ? If yes, please attach.
If not, try to rename the entire HWiNFO64.INI file to something else and check if it will open then.
 
我将没有，只有HWiNFO64.INI改为HWiNFO64.IN，然后运行hwinfo64.exe，没有生成HWiNFO64.DBG，是不是系统根本就没有运行hwinfo64.exe这个程序1716369344316.png
 
是的，依旧没有运行，我安装

Installer 安装
for Windows 7 and later (64-bit)
适用于 Windows 7 及更高版本（64 位）​

Version 8.02也是运行不了1716369550097.png
 
That's version 8.00. Try v8.02 installer and install it into default "Program Files" folder.
 
That's weird. Do you have some antivirus or similar software installed that could be blocking it? Try to check Event Viewer various logs if there's something about hwinfo.
 
我找到报错反馈了
错误应用程序名称: HWiNFO64.EXE，版本: 8.2.5440.0，时间戳: 0x6639ce67
错误模块名称: HWiNFO64.EXE，版本: 8.2.5440.0，时间戳: 0x6639ce67
异常代码: 0xc0000005
错误偏移量: 0x000000000040acec
错误进程 ID: 0x0x3FCC
错误应用程序启动时间: 0x0x1DAAC2AC4A35E91
错误应用程序路径: C:\Program Files\HWiNFO64\HWiNFO64.EXE
错误模块路径: C:\Program Files\HWiNFO64\HWiNFO64.EXE
报告 ID: 5c3b93f2-ce6c-4e6c-b938-86196c2ee8c7
错误程序包全名:
1716371082267.png
 
我该怎样操作


日志名称: Application
来源: Application Error
日期: 2024/5/22 17:31:05
事件 ID: 1000
任务类别: 应用程序崩溃事件
级别: 错误
关键字:
用户: DESKTOP-VC7ODKV\1
计算机: DESKTOP-VC7ODKV
描述:
错误应用程序名称: HWiNFO64.EXE，版本: 8.2.5440.0，时间戳: 0x6639ce67
错误模块名称: HWiNFO64.EXE，版本: 8.2.5440.0，时间戳: 0x6639ce67
异常代码: 0xc0000005
错误偏移量: 0x000000000040acec
错误进程 ID: 0x0x3FCC
错误应用程序启动时间: 0x0x1DAAC2AC4A35E91
错误应用程序路径: C:\Program Files\HWiNFO64\HWiNFO64.EXE
错误模块路径: C:\Program Files\HWiNFO64\HWiNFO64.EXE
报告 ID: 5c3b93f2-ce6c-4e6c-b938-86196c2ee8c7
错误程序包全名:
错误程序包相对应用程序 ID:
事件 Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Application Error" Guid="{a0e9b465-b939-57d7-b27d-95d8e925ff57}" />
<EventID>1000</EventID>
<Version>0</Version>
<Level>2</Level>
<Task>100</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000000</Keywords>
<TimeCreated SystemTime="2024-05-22T09:31:05.3214135Z" />
<EventRecordID>15674</EventRecordID>
<Correlation />
<Execution ProcessID="14720" ThreadID="13732" />
<Channel>Application</Channel>
<Computer>DESKTOP-VC7ODKV</Computer>
<Security UserID="S-1-5-21-3251451982-3129361487-696886374-1001" />
</System>
<EventData>
<Data Name="AppName">HWiNFO64.EXE</Data>
<Data Name="AppVersion">8.2.5440.0</Data>
<Data Name="AppTimeStamp">6639ce67</Data>
<Data Name="ModuleName">HWiNFO64.EXE</Data>
<Data Name="ModuleVersion">8.2.5440.0</Data>
<Data Name="ModuleTimeStamp">6639ce67</Data>
<Data Name="ExceptionCode">c0000005</Data>
<Data Name="FaultingOffset">000000000040acec</Data>
<Data Name="ProcessId">0x3fcc</Data>
<Data Name="ProcessCreationTime">0x1daac2ac4a35e91</Data>
<Data Name="AppPath">C:\Program Files\HWiNFO64\HWiNFO64.EXE</Data>
<Data Name="ModulePath">C:\Program Files\HWiNFO64\HWiNFO64.EXE</Data>
<Data Name="IntegratorReportId">5c3b93f2-ce6c-4e6c-b938-86196c2ee8c7</Data>
<Data Name="PackageFullName">
</Data>
<Data Name="PackageRelativeAppId">
</Data>
</EventData>
</Event>
 
Try to copy the HWiNFO64.INI file from the other location to that folder and run. Just make sure the INI file contains th e"DebugMode=1" line.
That should then run in Debug mode and produce the HWiNFO64.DBG file, please check for that file after it crashes.
 
You must log in or register to reply here.
Back
Top