HWINFO64 very slow starting and polling

[AnGeL0]

Hi,
I have an issue that HWINFO is starting very slow (3minutes) and polling sensor very slow. --> wasn't able to load sensors tab.
When starting it gets stuck a long time on "analyzing memory config" after the long start time it gets stuck on MX/EMC/LM/ADM.
Uping the prio in task manager didnt work.
Some older version like v7.40 work mostly but are miss reporting tsensors.

I don't know if its something with my 7800x3d and win 11 not working correctly (read on this forum that there are some issues)

Thanks for the help

 

[Martin]

This could be due to running some other monitoring/tweaking software that blocks HWiNFO.
You didn't provide the HWiNFO Debug File.

 

[AnGeL0]

Hi
Im not running any tweaking software like msi afterburner or monitoring software currently.
Attaching Debug files are is tricky when it takes ages to load, let me see what i can do here...

 

[AnGeL0]

Hope this helps

 

[Martin]

I can see something else blocking HWiNFO. You must be running some software that's causing this.

 

[AnGeL0]

I can see something else blocking HWiNFO. You must be running some software that's causing this.

currently only Citrix is running.
I have Afterburner and MSI Center installed but not running.
Does this cause an issue?
Because on my last build i was able to have them all running at the same time no issue

 

[Martin]

Some software even if not running can have services active in background.

 

[AnGeL0]

Hi seems like it was msi center...
Thanks for your help

 

[Martin]

Upgrading the MSI Center to latest version might fix that.

 

[AnGeL0]

BTW updating did not fix but uninstalling works so will keep as is