Invalid values after hibernation

Y

yuuta14

Member
HWINFO shows invalid values on some parameters on Minimum and Maximum upon wake up from Hibernation.
This behavior is reproducible.

Device: G14 (2022) with AMD 6900HS and RX6800S.
 

Attachments

  • HWiNFO64_2023-02-27_14-14-22.png
    HWiNFO64_2023-02-27_14-14-22.png
    121 KB · Views: 10
  • HWiNFO64_2023-02-27_14-14-23.png
    HWiNFO64_2023-02-27_14-14-23.png
    116.1 KB · Views: 10
  • HWiNFO64.zip
    1 MB · Views: 1
Please have HWiNFO running in Debug Mode when you hibernate the system and wake it up so that the erratic scenario will be captured in the Debug File.
 
I don't know what's happening but running HWINFO in Debug Mode, Hibernate, and Wake it Up DID NOT make the value erratic. I tried it 4 times.

Running it in non-debug mode did.
 

Attachments

  • HWiNFO64_2.zip
    369.3 KB · Views: 3
Thanks. That gives me an idea what the problem could be. Will try to fix this in the next build.
 
Please attach a new HWiNFO Debug File of latest version created during resume.
 
Hi Martin, hope this helps. Activated debug mode, hibernate for around 10 min, and resumed.
 

Attachments

  • HWiNFO64.DBG
    1.1 MB · Views: 4
Thank you. Did this issue happen during this hibernate/resume sequence? Because according to the DBG file it looks OK here.
 
Martin said:
Thank you. Did this issue happen during this hibernate/resume sequence? Because according to the DBG file it looks OK here.
Click to expand...
Just after I read your reply I hibernate my laptop and resume it right away, without activating debug mode. And yes, the value went erratic.


1680762636892.png

After that I tried activating debug mode again, hibernate and resume. No erratic values.
 
Interesting, this looks like a timing issue. I will try to further improve this in the next Beta build.
 
Thanks for the feedback, great to see that it finally works!
This will of course be carried into all subsequent releases.
 
You must log in or register to reply here.
Back
Top