Z490 Dark Kingpin No Voltage Readings Showing in HWInfo

Yaqy123

Member
Hi,
I was wondering if it was possible to have a look into the Z490 Dark Kingpin Hwinfo readings. Currently no voltage readings are output in Hwinfo. Please see the attached image for details.
Thanks
 

Attachments

  • Screen Shot 2020-09-19 at 10.39.50 pm.png
    Screen Shot 2020-09-19 at 10.39.50 pm.png
    1.3 MB · Views: 6

Martin

HWiNFO Author
Staff member
Please attach the HWiNFO Debug File for analysis. It would be also helpful if you could attach a screenshot of EVGA E-LEET tool showing sensor values.
 

seranidy

New Member
Here is a debug file from my z490 dark kingpin, and i have also attached a screenshot of evga eleet x1 software showing sensor values. Hope This Helps!
 

Attachments

  • HWiNFO64.DBG
    1.6 MB · Views: 3
  • eleet.PNG
    eleet.PNG
    175.2 KB · Views: 5

Martin

HWiNFO Author
Staff member
Thanks! This seems to be using some custom solution, I need to check with EVGA how to properly read sensors here. It will take a while...
 

Martin

HWiNFO Author
Staff member
That red X means monitoring is (user) disabled, hit the Ins key over the heading to enable it.
 

Martin

HWiNFO Author
Staff member
It should be displayed by default, not sure what happened perhaps some custom sensor layout on that machine caused this.
 
Top