Version Beta v8.01-5430 and 8.00 (no difference)
On an ASUS Z790-i board + 14900K (stock auto turbo clocks / SVID best case, icc 307) these values are wrong / very low or 0 on very light load or no load. Sometimes Vcore/ VOUT goes to 0.000v (while it should be at minimum 0.72v). IVR also goes near 0v. POUT/IOUT are also wrong or 0w.
OCtools RAW VRM is always displaying the correct VOUT / POUT values.
On load though these values on hwinfo are correct and the same as OCtools RAW VRM. For example, while running cinebench these values are correct.
I'm not running any other monitoring application at the same time.
I have noticed this is also happening on other ASUS boards (not sure on other brands/models).
This is not happening if I manually increase the Vcore (by svid offset or manual or higher acll value) or All Core multi.
On an ASUS Z790-i board + 14900K (stock auto turbo clocks / SVID best case, icc 307) these values are wrong / very low or 0 on very light load or no load. Sometimes Vcore/ VOUT goes to 0.000v (while it should be at minimum 0.72v). IVR also goes near 0v. POUT/IOUT are also wrong or 0w.
OCtools RAW VRM is always displaying the correct VOUT / POUT values.
On load though these values on hwinfo are correct and the same as OCtools RAW VRM. For example, while running cinebench these values are correct.
I'm not running any other monitoring application at the same time.
I have noticed this is also happening on other ASUS boards (not sure on other brands/models).
This is not happening if I manually increase the Vcore (by svid offset or manual or higher acll value) or All Core multi.
