Recent content by BobRock

Hi, I solved the mystery of the wrong rpm. I had set the fan curve starting from 0 volts. At voltages below 0.84 volts the chip in the fan does not provide reliable signals. So it was enough to start the fan curve from 0.84 and not 0. I hope it can be of help to someone else who has run into the...

The value reported are: 26,666 24,000 23,529 23,076 22,641 22,222

The cpu (liquid cooling) fans at idle are stopped and read correctly at 0 rpm. After launching any CPU test, the fans activate and adjust based on the temperature. once the test is finished they physically stop (0 rpm) but the program reads very high values. I don't have any other programs that...

no

Hi, I found another anomaly. For the CPU fan when you return to 0 rpm you get incorrect values like 24,000 rmp. I temporarily solved it by excluding values greater than 3000.

Magnificent, works perfectly. Thank you

I uninstalled MSI Center and rebooted. Values in HWiNFO are only read from version 8.12. Version 8.14 doesn't read them.

No

With the MSI center (updated or not) the values are read correctly.

Thank you, No I didn't disable/hide those values. Yes, I chose to display the fans at 0 as well but the problem is that it reads all at 0.

Greetings, from version 8.13 for the MSI PRO Z690-A WIFI motherboard several sensors are not displayed and all fans are read as 0 rpm. In previous versions such as 8.12 everything works normally. The operating system version is Windows 11 27744.1000.