Recent content by Deepcuts

  1. Deepcuts

    Inverted read/write activity SSD

    HWInfo 5.79.3385 Windows 10 64 bit For Samsung 960 EVO 500 GB, read and write activity seem to be inverted. [attachment=2735]
  2. Deepcuts

    Asus Strix GTX 1080 Ti OC Ambient Temperature

    On all sites that thermal imaged this card, VRM temperatures reached 87-88 deg. Celsius. The same as reported by HWiNFO as Ambient Temperature on mine. If there is anything I can provide to help, let me know.
  3. Deepcuts

    Asus Strix GTX 1080 Ti OC Ambient Temperature

    Thank you for the reply Martin, After reading http://www.guru3d.com/articles-pages/asus-rog-strix-geforce-gtx-1080-ti-review,9.html in which they thermal imaged the card, I tend to agree that the sensor is for VRM. In this case, should I open a bug report for changing the sensor name to GPU...
  4. Deepcuts

    Asus Strix GTX 1080 Ti OC Ambient Temperature

    Hello, HWiNFO 5.73.3350 Being busy since I've got my Strix, playtime was cut to a minimum. Today, I played for about 2 hours and noticed hwinfo showing GPU Ambient Temperature with a max of 87 deg. Celsius. This is while CPU max was 65 and GPU 68 deg. Celsius. Room temperature ~ 22 deg...
  5. Deepcuts

    NZXT Kraken X62 - Failed readings under load

    Thank you for the release. Tested ~ 45 minutes and the problem did not present itself.
  6. Deepcuts

    NZXT Kraken X62 - Failed readings under load

    0 is intermittent current value for pump speed and permanent value for minimum liquid temperature until reboot. As the attached image from the 1st post shows, the pump speed is reported at normal max speed with dips to 0. I have attached the debug log.  I had to zip it otherwise i could not...
  7. Deepcuts

    NZXT Kraken X62 - Failed readings under load

    hwinfo64 5.73.3345 Windows 10 64bit 1607 NZXT Kraken X62 AIO on Asus Maximus X HERO (i7 8700K) While doing stress tests and only while doing stress tests, using OCCT or Asus Realbench, after a short time hwinfo will report random pump speed 0 and minimum temperature 0. NZXT Cam software...
  8. Deepcuts

    Hard Disk activity - wrong disk

    Thank you. 5.73-3340 fixed the problem
  9. Deepcuts

    Hard Disk activity - wrong disk

    Thank you for the fast reply. Will report back when the new beta comes out.
  10. Deepcuts

    Hard Disk activity - wrong disk

    Version 5.72-3333 Windows 10 64bit For some time now I have observed this behavior, so I would say it is not related only to the latest version. My setup 1 x Samsung EVO 960 500GB M.2 nvme SSD. Drive C: (Only Windows on it) 1 x Samsung EVO 950 250GB SATA SSD. Not partitioned. Not...
Back
Top