I did try the obvious and closed the program and restarted
it, but it still did not work.
Hence, that's why I posted!
Today I switched the PC on, and did exactly the same procedure
and I can report all is well.. I see everything I should !
I am running windows 10, & HWiNFO64 v7.14
When I plug a SanDisk USB 3.1 Gen 1 flash drive
Into the USB socket then run, HWiNFO64.
Look down the left column to Ports>USB> I see 3 ASMEDIA Host Controllers.
When I open each ROOT HUB up in turn, I do not see the SanDisk USB 3.1 Gen 1 in...
Thank you Martin for the info:
I uploaded a picture of my Motherboard with SATA ports Labeled.
For clarification of the thread of the conversation for others reading this post.
I will take it that what I was suggesting can't be done,
and I will close the ticket on this.
Thank you once again for...
Thank you for taking the time in answering my question.
I am missing something at my end.
I followed your instructions:
1.Look in the main window under the Drives node.
2.Each drive will show a "Host Controller"
3. (In my case it is) Intel Kaby Lake - SATA AHCI Controller [A0]
Hi, I am looking for some Info:
I have an:
Asus Rog Maximus X Hero Motherboard
Intel Core i7-8700k CPU
6 SATA controllers are on this motherboard.
I am wanting to know if HWiNFO64 v7.14
can detect which drives are connected to which SATA controllers?
EXAMPLE: something like this would be...
I am running HWinfo64 v6.34-4300
I have A NVIDIA GeForce GTX 1080 video card.
I know how to monitor the speed of the card in windows 10
Through Task Manager/performance/
But can someone tell me how I can monitor it and see it in percentages %
How hard the Graphic Card is working in...