Thanks to your efforts, now the fan is recognized and read perfectly (it's synchronized with MyASUS app fan measurements as you can see in the picture:)
Once again thank you for taking the time to make this possible!
Sorry for the late answer (it was too late at night here), and thank you for taking the time to make this build!
Unfortunately the new fan sensors report 0 rpm all the time.
the hwinfo64.ini file looks like this:
[Settings]
SensorsSM=1
Lang=en
ShowFans0RPM=1
NegativeTempsOK=1
and the sensor...
Ok, I managed to completely uninstall hyper-V (and every trace of it since I don't use it anymore).
I attached the new hwinfo log file that confirms hyper-v is not there.
Unfortunately the problem with rw-everything still remains - it's stuck at "starting EC function" and shows all-zeroes. So it...
Hyper-V is already disabled. Here is my windows capabilities screen:
It seems that rw-tool remains stuck at "Starting Embedded controller function...". Maybe because I'm using the portable version??
it seems there is a problem with rw-everything tool in my case. No matter the fan speed, it always produces an all-zeros file (.rw or .bin). You can see this in the picture attached:
My hwinfo log file:
Hi and sorry for intervening in this thread, but I seem to have the exact same problem with my asus vivobook 15 (X512D)
My ASUS app shows 2000-3500 rpm of the fan depending on the CPU temp, and whenever the fan speeds up, hwinfo (ACPI) shows speed-down (from 700 drops to 400 rpm). On the other...
hi there, and thanks for this awesome software.
I've read the "known issues" sticky about incorrect cpu voltage readings, and thought I should post these pictures that prove it in my mobo, for future correcting.
In the first picture you can see that the CPU voltage reading in BIOS is 1.144...