Hi everyone,
I have an Asus ROG STRIX B450-F motherboard.
I use HWiNFO to monitor temperatures, voltages, etc.
However I recently noticed, that what is supposed to be 12V on the motherboard, is reported to be 10V by HWiNFO.
I checked in the UEFI/BIOS, it seems to be reporting correctly. It says 12V.
I also tried a multimeter, and connected it to an older molex connector. It also said 12V.
AIDA64 also has voltage reporting, and it also says 10V.
The PC otherwise runs great, I have no crashes.
Long gaming sessions are also fine. No performance degradation at all.
Even starting Furmark and Prime95 at the same time does not cause any trouble.
Should I believe HWiNFO and check with a different PSU?
Or is it possible that it is reporting inaccurately?
I have an Asus ROG STRIX B450-F motherboard.
I use HWiNFO to monitor temperatures, voltages, etc.
However I recently noticed, that what is supposed to be 12V on the motherboard, is reported to be 10V by HWiNFO.
I checked in the UEFI/BIOS, it seems to be reporting correctly. It says 12V.
I also tried a multimeter, and connected it to an older molex connector. It also said 12V.
AIDA64 also has voltage reporting, and it also says 10V.
The PC otherwise runs great, I have no crashes.
Long gaming sessions are also fine. No performance degradation at all.
Even starting Furmark and Prime95 at the same time does not cause any trouble.
Should I believe HWiNFO and check with a different PSU?
Or is it possible that it is reporting inaccurately?