ASUS EC OPT Temperatur reading Problem (Maximus V Formular)

BlackX

New Member
I have a Problem with the ASUS EC OPT 1-3 Temp reading:

If no Probe ist plugged in it reads -1.0 °C

If I plug in the Probe while HWiNFO is active it reads 0.0 °C

When I restart the Programm or PC while the Probe is plugged in the Entry is completely gone 
and disappears in Layout Settings.

If I pull the Probe and restart it reappears again.

The BIOS reads correct.

No AiSuite installed.

Debug File attached.

Thank You.
 

Attachments

  • HWiNFO64.DBG
    422.3 KB · Views: 2

Martin

HWiNFO Author
Staff member
Was the debug file you attached created when the probe was connected ? If not, please attach such Debug File.
Also, please tell me to which sensor was the probe attached.
 

BlackX

New Member
Martin said:
Was the debug file you attached created when the probe was connected ? If not, please attach such Debug File.
Also, please tell me to which sensor was the probe attached.

It's the OPT1 sensor.
 

Attachments

  • HWiNFO64.DBG
    689.1 KB · Views: 1
Top