Error 0d on reboot after starting HWINFO64

[error]

Motherboard: GIGABYTE X670E AORUS XTREME

I recently built a computer.
I have a problem: after starting HWINFO64 if I reboot, then I get an error on the motherboard 0d and the system will not boot.
If I don't use HWINFO64, then there is no error after restarting.

How to solve this problem?

 

[Martin]

This is a known problem usually caused by a conflict when running multiple monitoring/tweaking/fan/RGB control applications. It can be avoided by not running multiple such applications.
It's described in more detail here: https://www.overclock.net/threads/a...d-occasional-0d-codes-failure-to-boot.1812272

 

[error]

This is a known problem usually caused by a conflict when running multiple monitoring/tweaking/fan/RGB control applications. It can be avoided by not running multiple such applications.
It's described in more detail here: https://www.overclock.net/threads/a...d-occasional-0d-codes-failure-to-boot.1812272

Yes, I use 2 apps to control the fans:
NZXT CAM for AIO Liquid Cooler
GIGABYTE Control Center for case fans

How do I use only 1 app or no app at all to control the fans?
I can't in one app control the fan speeds for everything.

Maybe configure the case fans in the BIOS, and remove Gigabyte Control Center and only use NZXT CAM for AIO Liquid Cooler?
If this is ok, then the problem will be solved?

 

[Martin]

Unfortunately NZXT CAM is most likely the problematic one. You might try some other tools like ArgusMonitor (FanControl is also causing issues with other apps).

 

[error]

Unfortunately NZXT CAM is most likely the problematic one

Yes, right.
However, if I uninstall NZXT CAM, I can't see the CPU temperature at the pump.

Spoiler: here

What are some alternative programs for NZXT CAM?