Fan monitoring requests

Thanks. Have you tried the AI Suite if that might trigger reporting of fan speeds in HWiNFO?
 
Try to heat it up above 70 C and then check in HWiNFO. Still reporting 0 RPM in HWiNFO and Armoury Crate reports non-zero speeds?
 
Try RW-Everything -> Memory -> enter address FE700600 and watch the content. Does it show non-zero values in that region when fans are active?
 
Can you see changing values in the Embedded Controller when fan speeds change? If yes, try to create 2 dumps with low and high fan speeds and include the actual fan speeds in the filenames.
 
Martin said:
Can you see changing values in the Embedded Controller when fan speeds change? If yes, try to create 2 dumps with low and high fan speeds and include the actual fan speeds in the filenames.
Click to expand...
Done! And yes I could see them change, 3-4 values which changing faster if FAN speeds goes higher.
 

Attachments

  • high_speeds.zip
    1,008 bytes · Views: 1
  • low_speeds.zip
    1,010 bytes · Views: 1
Thanks. Unfortunately this doesn't seem to be the right way either.
It should work the way it's implemented in HWiNFO currently but for some reason it doesn't.
Try to maybe upgrade the BIOS?
 
Martin said:
Thanks. Unfortunately this doesn't seem to be the right way either.
It should work the way it's implemented in HWiNFO currently but for some reason it doesn't.
Try to maybe upgrade the BIOS?
Click to expand...
Hmm, I've latest BIOS version 331 updated.
 
Per the last DBG you provided it was version 329. So you upgraded the BIOS and still the same behavior?
 
You must log in or register to reply here.
Back
Top