HWiNFO v6.27-4195 Beta released

Martin

HWiNFO Author
Staff member
HWiNFO v6.27-4195 Beta available.

Changes:
  • Fixed and improved monitoring of VR VCC sensor on Intel SVID VR systems.
  • Added per-rail voltage and power monitoring on NVIDIA GPUs.
  • Enhanced sensor monitoring on ASUS ROG STRIX B460 series.
  • Fixed a possible crash on some systems with down-cored CPUs.
  • Added reporting number of RT and Tensor Cores for NVIDIA (requires R445+).
  • Enhanced sensor monitoring on ASUS Pro WS W480-ACE.
  • Enhanced sensor monitoring on ASUS ROG STRIX B550-E/I GAMING.
  • Enhanced sensor monitoring on ASRock H470, B460 and H410 series.
  • Enhanced sensor monitoring on ASRock W480 Creator.
  • Improved support of hybrid CPUs (Alder Lake).
  • Enhanced sensor monitoring on GIGABYTE B550 series.
  • Enhanced sensor monitoring on MSI B550 series.
  • Added dedicated support of LSI MegaRAID controllers. Requires LSI storelib*.dll libraries.
  • Fixed support of Intersil ISL69269 VRM.
  • Added monitoring of Power Reporting Deviation on AMD Ryzen CPUs.
  • Enhanced sensor monitoring on ASUS ROG STRIX B550-F and PRIME B550 series.
  • Enhanced sensor monitoring on ASUS TUF GAMING B550-PLUS.
  • Fixed monitoring of Power Reporting Deviation on AMD 1st/2nd Gen Ryzen CPUs.
 
Build 4195 adds some important changes to the "Power Reporting Deviation" parameter:
- The tolerance threshold has been increased from 5% to 10%.
- Values below 90% will be shown in red color to denote under-reporting.
- This parameter will not be shown if OC Mode is enabled.
- Removed reporting of this parameter on sTRX4 systems.

There will be a more detailed explanation posted by The Stilt soon.
EDIT: Posted here. I strongly encourage everyone interested in this topic to read that post.
 
Last edited:
1.) I could not see Power Reporting Deviation on V4195Beta anymore. see also V4190 screenshot
2.) with Ryzen 3950x / X570 Aorus xtreme with default setting (only XMP active) PRD is 92% under load
with fixed clock (4150MHz) and PBO activated the PRD is now 142% under load (BOINC % F@H)

2020-06-18 23_35_23-HWiNFO64 v6.27-4190 Sensor Status [196 values hidden].jpg2020-06-18 23_34_47-HWiNFO64 v6.27-4195 Sensor Status [196 values hidden].jpgBIOS_1.JPGBIOS_2.JPG
 

Attachments

  • 2020-06-18 23_35_23-HWiNFO64 v6.27-4190 Sensor Status [196 values hidden].jpg
    2020-06-18 23_35_23-HWiNFO64 v6.27-4190 Sensor Status [196 values hidden].jpg
    1.1 MB · Views: 4
  • 2020-06-18 23_34_47-HWiNFO64 v6.27-4195 Sensor Status [196 values hidden].jpg
    2020-06-18 23_34_47-HWiNFO64 v6.27-4195 Sensor Status [196 values hidden].jpg
    1.1 MB · Views: 4
Is OC Mode perhaps enabled there? You can check that in the main window.
hi martin
of cause is OC enabled, that's the difference in PRD seen in V4190 (92% in default bios, 142% with fixed clock and VID = BIOS_1 & _2))
but why is PRD not visible in V4195?
 
hi martin
of cause is OC enabled, that's the difference in PRD seen in V4190 (92% in default bios, 142% with fixed clock and VID = BIOS_1 & _2))
but why is PRD not visible in V4195?

Have you read the comments above?
 
Back
Top