Hello,
Running Win10 Pro x64(1803)
I've never had a problem with HWINFO before, but now, with version 5.86 as well as 5.84, program gets stuck on:
Examining system configuration...
Analyzing PCI Bus
System monitor says program is taking about 12.5% CPU, no I/O.
Tried deleting ini file - same result. Same when selecting Sensors-only or Summary-only.
Default Settings, but same when Reorder GPUs is deselected.
Everything in system up to date; nothing missing in Device Manager.
End of the DBG file has (complete file attached):
ACPI HAL PDO: \Device\00000011
ACPI HAL PDO Success
- Analyzing PCI Bus...
GetMCFG
MCFG[0] = E0000000 (0-FF)
CL init
I have one other program (xmedia recode) that appears to behave the same way (i.e. stuck at 12.5% CPU). I assume there is some connection, but I don't know how to find it.
Thanks for any advice.
Running Win10 Pro x64(1803)
I've never had a problem with HWINFO before, but now, with version 5.86 as well as 5.84, program gets stuck on:
Examining system configuration...
Analyzing PCI Bus
System monitor says program is taking about 12.5% CPU, no I/O.
Tried deleting ini file - same result. Same when selecting Sensors-only or Summary-only.
Default Settings, but same when Reorder GPUs is deselected.
Everything in system up to date; nothing missing in Device Manager.
End of the DBG file has (complete file attached):
ACPI HAL PDO: \Device\00000011
ACPI HAL PDO Success
- Analyzing PCI Bus...
GetMCFG
MCFG[0] = E0000000 (0-FF)
CL init
I have one other program (xmedia recode) that appears to behave the same way (i.e. stuck at 12.5% CPU). I assume there is some connection, but I don't know how to find it.
Thanks for any advice.