Missing informations + S.M.A.R.T. values for SSD after hardware changes



I changed my PC's hard drives today and noticed that for one of my SSDs (Samsung SSD 850 Pro 256GB) the informations in the "Main"-window and the S.M.A.R.T. sensor values are missing.

CrystalDiskInfo and smartctl can read the drive without problems, just HWiNFO64 doesn't.

If you have use for it, I noticed that on lines 14148 and 14149 after the S.M.A.R.T. values of another SSD (Samsung SSD 860 Pro 512GB) are read, there are are following errors shown:

[SCSI1] Get MiniportID - Failed (1117)
[SCSI1] Get MiniportID - Failed (1117)

Both SSDs (850 and 860) are plugged into the same controller (ASMedia ASM1061).

Full debug file is attached, thanks for your help in advance.


  • HWiNFO64-samsung-ssd-850-pro-missing.7z
    198.2 KB · Views: 2


HWiNFO Author
Staff member
I think I found the bug, will try to fix this in the next (Beta) build.