Recent content by blackie

  1. B

    Lost CPU Fan Speed Sensor Reading

    Just thought I would mention that my fan speeds are reporting fine (build 5.11-2712)
  2. B

    Lost CPU Fan Speed Sensor Reading

    RE: Lost CPU Fan Spped Sensor Reading Your right - I never looked there. On 4.20 it is at the end of the list (I have not checked the other versions - I am just running 4.20 at the moment). OK - 4.24 works the same as 4.20 Evidently I have a "funny" board that does not report correct...
  3. B

    Lost CPU Fan Speed Sensor Reading

    RE: Lost CPU Fan Spped Sensor Reading OK - I ran all the versions you sent me. First of all I apologize. I did not realize that the dbg file showed that the sensors were reporting an invalid value - that rules out a timing problem. In all cases (17, 18, 20, 22 and 24) my rig seems to be...
  4. B

    Lost CPU Fan Speed Sensor Reading

    RE: Lost CPU Fan Spped Sensor Reading HI Martin: I was not suggesting that it was the reading of the registers that was a problem. Only that between the reading and the display there might be a synchronizing problem. The dbg showed that the registers were read correctly - how about where...
  5. B

    Lost CPU Fan Speed Sensor Reading

    RE: Lost CPU Fan Spped Sensor Reading Hi Martin: I suggest that it is a thread timing or synchronizing problem. (I don't wish to step on your toes but I have had many years experience as an embedded SW engineer and have seen things like this before). What leads me to this idea is: (1)...
  6. B

    Lost CPU Fan Speed Sensor Reading

    RE: Lost CPU Fan Spped Sensor Reading That seems to make no difference. One thing I have not mentioned is that the line showing the Exhaust Fan comes and goes (on restarting). Running after disabling "Evaluate ACPI Methods" the Big Exhaust Fan line is gone. I do not think it is directly...
  7. B

    Lost CPU Fan Speed Sensor Reading

    RE: Lost CPU Fan Spped Sensor Reading I am not sure my last composed message was actually posted - so I will do it again. I reseructed an old save of HWIFO64 and ran it again. Attached are the dbg file and a screen shot showing it working correctly as I described. [hr] The attachments do not...
  8. B

    Lost CPU Fan Speed Sensor Reading

    RE: Lost CPU Fan Spped Sensor Reading Attached is both monitoring programs running at the same time (speedfan disabled and not running). Note the strange missmatch. It appears that HWINFO is still not showing the CPU fan - but is showing the intake fan (that fan is not controlled and always...
  9. B

    Lost CPU Fan Speed Sensor Reading

    RE: Lost CPU Fan Spped Sensor Reading Attached is Capture1 - showing CPUID (still withOUT speedfan running. Capture2 shows the same thing - only with speedfan running (and commanding the CPU and Big Exhaust fan to zero - because the tempatures are at my minimum and the fans do not need to be...
  10. B

    Lost CPU Fan Speed Sensor Reading

    RE: Lost CPU Fan Spped Sensor Reading Same behavior without speedfan or any overclock. Attached is the dbg file and a screen capture (old version would show all 4 fans here).
  11. B

    Lost CPU Fan Speed Sensor Reading

    RE: Lost CPU Fan Spped Sensor Reading Attached is the debug file. I have 4 fans controlled by the IT8720F chip. CPU is fan 1, Big exhaust is fan 2, small fan is 3 and the intake fan is fan 5. Only the fist two fans are controllable (I use speed fan to control them). The two uncontrollable...
  12. B

    Lost CPU Fan Speed Sensor Reading

    I think I was previously using v4.17 That was an older version that I just updated to version v4.24-2000 today. This new version does not show my CPU fan speed in the sensor Status display. v4.17 was just fine.
  13. B

    Sensor Alert and Control

    Ahh - that explains it. I am playing Crysis and do not see the alert window - I guess it is hidden by the game. Anyhow - when I quite and look at the graph of the GPU is stays at the alert level (i. e. it never gets updated after that). This is no real problem - I just did not understand what...
  14. B

    Sensor Alert and Control

    A general question about what happens when a sensor alert occurs. I am monitoring my GPU temperature. If I set it to alert when the temp goes over 60 degrees - it alerts properly - but the GPU temperature NEVER goes any higher than 61. When I set the alert at 64 degrees - it alerts - but NEVER...
  15. B

    Incorrect GPU Readings & Corrupted Benchmark Comparison

    Sounds good!! As an aside to the above - it must be the reading itself - not a corrupted screen. I forgot to mention that I had an alarm set to go off if it read a temperature greater than 60 degrees. It went off and instantaneously the temperature was 175. (I have not been able to repeat it...
Back
Top