Recent content by Daedelous

I also wanted to mention that I also tried running the newest beta version HWiNFO64 5.03-2585 and encountered the same issue with the drives reporting the incorrect size.  From the research I have done, I have the most recent Raid driver version installed.  I also wanted to note that even when...

When I normally run HWiNFO I don't have Debug Mode selected.  I only selected it that time so I could provide the Report and Debug file, which is when I also noticed the unusually high hard drive activity.  I also forgot to mention in my initial post that the drive sizes are not being reported...

I have noticed that when I run HWiNFO64 v5.02-2575 during the scanning of hardware, the PCI Bus scan and Drive Scan both take a longer than usual time.  The drives attached to my motherboard now shows SMART temperature and health values in the Sensor window, while HWiNFO64 v4.64-2530 didn't show...

I just thought of something regarding motherboards and their bios. Maybe there is a way to get the actual information needed from the bios file itself. I would imagine using some hex editor or such would be needed. But since you made the comment about each motherboards bios having the right...

Below is a screenshot showing cpuid hwm and hwinfo32 3.50-722 build that you linked. Hope this helps. I do still notice some voltages are showing different values. Don't know if that really is an issue or not. It would be nice if the manufactures of these chips that monitor system voltages...

Here is the limited amount of voltage readings listed in my bios screen. PC Health Status CPU Vcore--------1.368 V 3.3V--------------3.296 V 5V----------------4.970 V 12V--------------11.968 V

Attached is the zip file with the two files requested. Not really sure how to get a screen capture of the Bios sensors, I have no camera. From what I have seen the bios sensor screen is similar to what CPUID Hardware Monitor and Everest have displayed regarding the values for voltages.

The below screenshot shows the differences in voltage readings using CPUID Hardware Monitor v1.15 and HWiNFO32 v3.50-715. I have also tried Everest Ultimate Edition v5.50.2100 and it reflects readings that are similar to CPUID Hardware Monitor. I have also tried HWM BlackBox 2.0 and it...