Recent content by ezflma

@Martin (and anyone else), it looks like Intel finally corrected the 0c temp sensor bug with microcode 0x1F. I'm running an MSI Z690 Edge WiFi DDR4 with an i9-12900K. This microcode revision was added to my MB's support site on MSI with the main feature of enabling i9-12900KS support. I let...

I re-reported it to Intel. Said C-States Enabled/Auto = 0c readings and C-States Disabled = No issues. Got this back from Intel escalated support: I referenced the forum, HWInfo, HWMonitor, motherboard, bios version, batch number, my old Z490/Rocket Lake similar issue and Comet Lake no issue...

@Martin and @mnemonic -- revisiting this. I used your suggestion about C-States. Sure as heck, after DISABLING C-States in the MSI bios, voila ... no 0c readings for the 1.5hr of mixed use (idle, gaming, etc.). I went back and changed C-States to "AUTO" [default setting] as well as C1E...

Morning, everyone.. I’m glad to see that there’s been additional convo and exploring this since my first post. Wanted to share a couple things: I returned the i7-11700K and up/downgraded to an i9-10850K using the same Gigabyte board and never had the 0c issue. Recently, I upgraded to a MSI...

For what it's worth, I returned the i7-11700K for an i9-10850K -- no issues. Either it was a BIOS issue, or given the issues I've had with that RKL chip, perhaps the CPU's thermal sensors were faulty.

I did upgrade to the new F20 (non-beta) BIOS that Gigabyte posted last night. Continue to see 0c. I'm on microcode 0x34, which is older, but I'm at the mercy of Gigabyte's BIOS releases. Apparently 0x39 and 0x3c are newer, but Gigabyte hasn't released these microcode BIOS updates for their...

Thanks for taking the time to respond; there’s a “new” bios posted on tweaktown but they haven’t posted to Gigabyte’s site yet. When it does, I’ll flash the board, retest and respond back. Thanks again.

It's about 13mb., so I can't upload to this forum. However, try this: https://www.dropbox.com/s/yfk6381n08tr9b3/HWiNFO64.DBG?dl=0

Hi, I have an i7-11700K (running stock) on a Gigabyte Z490 Vision D motherboard with the latest BIOS (F20d). I've noticed that v7.03-4450 during Sensor Status will occasionally / eventually report the individual Core minimum temps to 0c, which also affects the Core Distance to TJMax to then...